- Stock: In Stock
- Brand: KBI
- Product Code: 44265
Here is a Sartorius KBI kSep400 Centrifugation System
Made by KBI, now branded by Sartorius
This instrument sold new for over $300,000
This Sartorius KBI kSep400 Centrifugation System is in good working order.
Please see exact video and photos below.
Testing we performed:
The Sartorius KBI kSep400 Centrifugation System passed all tests and was found to be fully functional:
Plugged in and powered on: PASSED
Logged in under "operator": PASSED
Tested operation of all safety interlocks: PASSED
Performed safety reset: PASSED
Tested operation of all 5 peristaltic pumps: PASSED
Tested operation of all 8 pinch-valves: PASSED
Tested operation of bubble sensors: PASSED
Tested rotor up to 20g: consumables required to safely operate at higher forces
System consists of:
Ksep 400 Automated Centrifugation System
Power cable (NEMA L21-30P)
Configuration and Setup:
Cell Capacity per Cycle (CHO): up to 80 Billion
Flow Rate: 114 L/hr
Maximum Centrifugal Force: 1,000 g
Volumes: chamber volume 400 mL (4 x 100 mL), working volume 0.1 - 500 L
Processing volume 0.05-500L
Power Requirements: 208 - 240 V1 Ph; 20A
Height: 140 cm
Length: 107.5 cm
Width: 72 cm
Weight: 350 kg
Ksep systems provide robust, single-use bioprocessing solutions in the areas of recombinant therapeutics, cell therapy, vaccine manufacturing, and blood processing.
Ksep systems solve the problems of traditional centrifugation and filtration based technologies by handling very high cell densities while providing high recoveries and product quality.
Through the balance of centrifugal and fluid flow forces, the Ksep retains particles such as cells or microcarriers, as a concentrated fluidized bed under a continuous flow of media or buffer.
These are the only bowl centrifuges that do not stop rotating while discharging.
The video gives an overview of the Sartorius KBI kSep400 Centrifugation System, and also performs functionality.
Manual: hard copy manual included
This will ship via freight. Please contact us with your zip code to obtain shipping quote.
Please do not hesitate to contact us if you have any questions.
Here we are showing you our standard packing process
1. All items are different, but they all follow the same principle when packaging.
2. Start with a well-constructed crate
A well-constructed crate would consist of 1/2” to 5/8” Plywood with framing. We generally purchase our crates from a third party who specializes in custom crates.
3. You always want the Instrument to not be directly on the wood deck of the crate. This is done by placing it on foam, inside of the crate. We use 2” 1.7 lb. density foam which works great. It provides cushioning and enough firmness to support the Instrument.
4. The next step is to make sure there is nothing on the deck of the Instrument and the Head/ Arm is secured. In some cases there will be multiple arms to secure but for this example there is only one. The reason for this is so there is no free movement during transit which could cause serious damage to the Instrument.
5. The next step is to make sure your Instrument is covered in either a pallet bag or shrink wrap so no dust or foreign object will get into the crate.
6. The next step is to secure the instrument inside the crate by bracing. We use a method of 2x4’s which have 1” foam shrink wrapped to them so no piece of wood touches the actual instrument.
7. Final step is to photograph everything inside the crate and then seal it with screws.
All equipment warranty request must have a support case opened within the 60-day Domestic USA and 30-day International warranty period.
To open a support case, please send an email to [email protected] or call (508)974-4896.
Please provide your name, contact information, quotation/invoice number and a brief description of the issue that you are experiencing.
Phone and/or Email support will be provided prior to scheduling a return.
Please see the link below for our detailed warranty statement.
Customers must retain all original shipping materials during the warranty period.