Liquid Chromatography

MALS Detectors: High-gain, high dynamic range photodiodes at 3 detection angles
Auxilary Detectors: Laser monitor for stabilization feedback
Dynamic range: 3,300,00:1
Laser wavelength: 658 nm ± 4 nm
Molar mass range: 200 Da to 10 MDa (proteins) or 1 MDa (linear polymers)

MicroDAWN MALS Detector & MicroOptilab RI Detectors
Molar Mass Range: 200 Da to 10 MDa (proteins) or 1 MDa (linear polymers)
MALS Detectors: high-gain, high dynamic range photodiodes at 3 detection angles
Laser Wavelength: 659 nm ± 4 nm
Absolute Refractive Index range (RIU): 1.2 to 1.8

Type: GPC Detector Stack
Appliaction: Analysis of polymers, peptides, proteins and other amino acid chains.
MALS Detector Molar Mass range: 200 Da to 1 GDa
Differential Refractive Index Range (RIU): -0.0047 to +0.0047
Differential Viscosity Sensitivity: 0.1 μg of 100 kDa polystyrene in THF at 1 mL/min, under typical GPC conditions

Type: GPC Detector Stack
Appliaction: Analysis of polymers, peptides, proteins and other amino acid chains.
MALS Detector Molar Mass range: 200 Da to 1 GDa
Molecular Size Range (Rh, with WyattQELS DLS module): in flow mode: 0.5 nm to 300 nm; In batch mode: 0.5 nm to 1 um
Differential Viscosity Sensitivity: 0.1 μg of 100 kDa polystyrene in THF at 1 mL/min, under typical GPC conditions

RhВ from 0.2 nm - 1000 nm
Temperature range: -10 °C to +120 °C
Molecular weight: 300 Da to 1 MDa
Turbidity from 1 to 80 NTU
SLS and DLS detection channels; Laser wavelength: 658 nm

Wavelength range: 190 to 700 nm; accuracy: ±1 nm
Sampling rate: up to 80 points/s
Dispersion volume: ≤0.8 uL (Analytical flow cell)
Path length: 10 mm; Flow cell volume: 500 nL (analytical flow cell)
Pressure limit: 1000 psi

Injection volume range: 50-ul loop standard; 1,2,5,10,20,100,250-ul loops available
Temperature control: 0.1 to 25.0 C, in 0.1C increments
Digestion Column heater: Accommodates one column up to 50mm length
Digestion column temp control: 10.0C above HDX chamber temperature to 45.0C in0.1C increments

Flow rate range: 200nL/min to 50uL/min
Column trapping pump: choice of 2 eluents

Wavelength range: 190 to 500 nm; accuracy: ±1 nm
Sampling rate: up to 80 points/s
Flow cell design (analytical): light-guiding UPLC intelligent technology flow cell
Flow cell volume: 500 nL; path length: 10 mm
Pressure limit: 1000 psi (all flow cells)

Number of plates: two plates of 96 and 384 microtiter plates / 48 position vial plates / micro-centrifuge tubes /24 position micro-centrifuge tube plates
Maximum sample capacity: 768 in two 384-well plates
Injection volume range: 0.1 to 50.0 uL, in 0.1 uL increments, partial or full loop mode
Sample delivery precision (full loop injection mode): < 0.3% RSD, full loop, standard 10-uL loop (default wash/purge conditions)
Sample temperature control: 4DegC - 40DegC, settable in 0.1 DegC increments (at an ambient temperature of 25DegC)

Injection volume range: 0.1 to 50 uL
Accuracy (aspiration): ±0.2 uL
Number of sample plates: any (2) of the 96 and 384 microtiter plates (other options possible)
Sample compartment: 4 to 40 DegC, settable in 0.1 DegC increments
Temperature accuracy: ±0.5 DegC; stability: ±1.0 DegC at sensor

Number of solvents: up to four solvents in any combination
Solvent degassing: integrated vacuum degassing, four chambers
Gradient formation: low-pressure mixing, quaternary gradient
Gradient profiles: 11 gradient curves
Primary check valve: intelligent Intake Valve (i2 Valve)

Number of solvents: up to four solvents in any combination
Unit modules: Quaternary solvent manager, Sample manager-FTN, column manager, TUV detector, QDa detector
Labware Compatibility: (2x) 96- or 384-well plates, other options
Wavelength Range TUV Detector: 190 - 700 nm; Mass range QDA Detector: 30 - 1250 m/z
Maximum operating pressure: up to 15,000 psi

Wavelength range: Ex.:200 to 890 nm; Em.: 210 to 900 nm
Measurement range: 0.001 to 10,000 EU
Data acquisition: up to 80 Hz
Flow cell design: axially illuminated, cell volume: <2 uL
Pressure limit: 500 psi

Wavelength range: Ex.:200 to 890 nm; Em.: 210 to 900 nm
Measurement range: 0.001 to 10,000 EU
Data acquisition: up to 80 Hz
Flow cell design: axially illuminated, cell volume: <2 uL
Pressure limit: 500 psi

Column capacity: Single column, up to 150 mm in length, up to 4.6 mm internal diameter (I.D.)
Column compartment temperature range: 5-90DegC, settable in 0.1DegC increments
Column compartment temperature accuracy: ±0.5 DegC at the sensor
Column compartment temperature stability ±0.3 DegC at the sensor
Solvent conditioning: active pre-heating

Number of solvents: four solvents; operating flow rate range: 0.010 to 4.000 mL/min, in 0.001-mL increments
Labware compatibility: (2x) 96- or 384-well plates, other options
Injection volume range: 0.1 to 50.0 uL, in 0.1-uL increments; 10-uL loop
Column compartment temperature range: 4 to 90 DegC settable in 0.1 DegC increments
PDA detector wavelength range: 190 to 800 nm

Number of solvents: four solvents; operating flow rate range: 0.010 to 4.000 mL/min, in 0.001-mL increments
Labware compatibility: (2x) 96- or 384-well plates, other options
Injection volume range: 0.1 to 50.0 uL, in 0.1-uL increments; 10-uL loop
Column compartment temperature range: 4 to 90 DegC settable in 0.1 DegC increments
PDA detector wavelength range: 190 to 800 nm; Mass range QDA Detector: 30 - 1250 m/z

System pressure, maximum: 700 bar
Flow range: 0–10 mL/min
Sample capacity: 4 racks of 54 1.5mL vials
pH range: 1–13, chloride concentration up to 0.1 mol/L
Injection volume range 0.01-100uL