Rotor model installed: 70 Ti Maximum capacity volume range: 1500ml (8x39 mL / 1x4 in. (312 mL) with current rotor installed) Max RPM speed: 90,000 rpm (70,000 rpm with current rotor installed) Temp range: 0 to +40 DegC in 1 DegC increments 10 acceleration/11 deceleration speeds
Maximum speed: 100,000 rpm (rotor dependent) Maximum capacity: 6 x 250 mL (rotor dependent) Drive system: imbalance tolerant direct drive; eye balance to within 5 mm Acceleration/Braking profiles: 10/11 (10 and coasting) Temperature control range: 0 – 40DegC
Maximum speed: 90,000 rpm (rotor dependent) Maximum capacity: 6 x 250 mL (rotor dependent) Drive system: imbalance tolerant direct drive; eye balance to within 5 mm Acceleration/Braking profiles: 10/11 (10 and coasting) Temperature control range: 0 – 40DegC
Maximum speed: 90,000 rpm (rotor dependent) Maximum capacity: 6 x 250 mL (rotor dependent) Drive system: imbalance tolerant direct drive; eye balance to within 5 mm Acceleration/Braking profiles: 10/11 (10 and coasting) Temperature control range: 0 – 40DegC
Rotor model installed: JLA-8.1000 rotor Maximum capacity volume range: 1-6 L (6 tubes x 1000mL (6L) with current rotor installed) Max RPM speed: 500-26.000 RPM in 10 RPM increments (8,000 with current rotor installed) Temp range: -10 to +40 DegC in 1 DegC increments 11 acceleration speeds/12 deceleration speeds
Rotor model installed: T-647.5 Fixed Angle Rotor Maximum speed: 80,000 rpm (47,500 rpm with current rotor installed) Maximum RCF: 546,883 x g (250,259 xg with current rotor installed) Maximum capacity: 6 x 250 mL, (6 x 100 mL with current rotor installed) Acceleration/Braking profiles: 10/11
Rotor model installed: JLA-10.500 rotor Maximum capacity volume range: 1-6 L (6 tubes x 500mL (3000ml) with current rotor installed) RPM speed: 500-26.000 RPM in 10 RPM increments (10,000 with current rotor installed) Temp range: -10 to +40 DegC in 1 DegC increments 11 acceleration speeds / 12 deceleration speeds
Rotor model installed: F14-14x50cy Fixed-Angle Rotor Maximum speed: 29,000 rpm (14,000 rpm with current rotor installed) Maximum capacity: 6 x 1000 mL, (14 x 50 mL with current rotor installed) Temperature control range: -20DegC to +40DegC Accel/decel profiles: 9/10
Max Capacity Volume Range: up to - 9L (8L with current rotor) Maximum Speed: 10,000 RPM (5,000 RPM with current rotor) Maximum g-Force: 17100g Temperature Range: from -10C to +40C Timed Run: 1 min to 99 hrs, 59 mins (timed run); Total centrifuge effect (g-seconds) or Continuous hold
Rotor model installed: F14-14x50cy Fixed-Angle Rotor Maximum speed: 24,000 rpm (14,000 rpm with current rotor installed) Maximum capacity: 4 x 1000 mL, (14 x 50 mL with current rotor installed) Accel/decel profiles: 9 Accel, 10 Decel Temperature control range: -10DegC to +40DegC
Rotor model installed: H-6000A Swinging Bucket Rotor Maximum speed (rpm): 5,000 Maximum capacity: 6 x 1,000 mL bottles or 12 blood bags Accel/decel profiles: 11 Temperature control range: -10 to +40 DegC
Rotor model installed: JA-30.50Ti Rotor Maximum capacity volume range: 4 L (8 tubes x 50mL (400ml) with current rotor installed) RPM speed: 30000 RPM with current rotor installed Temp range: -20 to +40 DegC in 1 DegC increments 12 acceleration speeds / 13 deceleration speeds
Rotor model installed: T-647.5 Fixed Angle Rotor Maximum speed: 80,000 rpm (47,500 rpm with current rotor installed) Maximum RCF: 546,883 x g (250,259 xg with current rotor installed) Maximum capacity: 6 x 250 mL, (6 x 100 mL with current rotor installed) Acceleration/Braking profiles: 10/11
Cell Capacity per Cycle (CHO): up to 80 Billion Flow Rate: 114 L/hr Maximum Centrifugal Force: 1,000 g Volumes: chamber volume 400 mL (4 x 100 mL), working volume 0.1 - 500 L Power Requirements: 208 - 240 V1 Ph; 20A
Rotor model installed: NVT-65 rotor Maximum capacity volume range: 1500ml (8x14 mL / 1x3 in. (108 mL) with current rotor installed) Max RPM speed: 80,000 rpm (65,000 rpm with current rotor installed) Temp range: 0 to +40 DegC in 1 DegC increments 10 acceleration speeds/11 deceleration speeds
Rotor model installed: JLA-8.1000 rotor Maximum capacity volume range: 1-6 L (6 tubes x 1000mL (6L) with current rotor installed) Max RPM speed: 500-26.000 RPM in 10 RPM increments (8,000 with current rotor installed) Temp range: -10 to +40 DegC in 1 DegC increments 11 acceleration speeds/12 deceleration speeds
Max Capacity Volume Range: up to - 9L (8L with current rotor) Maximum Speed: 10,000 RPM (5,000 RPM with current rotor) Maximum g-Force: 17100g Temperature Range: from -10C to +40C Timed Run: 1 min to 99 hrs, 59 mins (timed run); Total centrifuge effect (g-seconds) or Continuous hold
Max Capacity Volume Range: up to - 9L (8L with current rotor) Maximum Speed: 10,000 RPM (5,000 RPM with current rotor) Maximum g-Force: 17100g Temperature Range: from -10C to +40C Timed Run: 1 min to 99 hrs, 59 mins (timed run); Total centrifuge effect (g-seconds) or Continuous hold
Max Capacity Volume Range: up to - 9L (8L with current rotor) Maximum Speed: 10,000 RPM (5,000 RPM with current rotor) Maximum g-Force: 17100g Temperature Range: from -10C to +40C Timed Run: 1 min to 99 hrs, 59 mins (timed run); Total centrifuge effect (g-seconds) or Continuous hold
Max Capacity Volume Range: up to - 9L (8L with current rotor) Maximum Speed: 10,000 RPM (5,000 RPM with current rotor) Maximum g-Force: 17100g Temperature Range: from -10C to +40C Timed Run: 1 min to 99 hrs, 59 mins (timed run); Total centrifuge effect (g-seconds) or Continuous hold
Max Capacity Volume Range: up to - 9L (8L with current rotor) Maximum Speed: 10,000 RPM (5,000 RPM with current rotor) Maximum g-Force: 17100g Temperature Range: from -10C to +40C Timed Run: 1 min to 99 hrs, 59 mins (timed run); Total centrifuge effect (g-seconds) or Continuous hold
Rotor model installed: JLA-10.500 rotor Maximum capacity: 4L (6 tubes x 500mL (3000ml) with current rotor installed) Set RPM speed: 300 to 21.000 RPM in 10-RPM increments (10.000RPM with current rotor installed) Temp range: -10 to +40 DegC in 1 DegC increments Two acceleration speeds, three deceleration speeds
Rotor model installed: JA-25.50 rotor Maximum capacity: 4L (8 tubes x 50mL (400ml) with current rotor installed) Set RPM speed: 300 to 21.000 RPM in 10-RPM increments (max. 21.000 RPM with current rotor installed) Temp range: -10 to +40 DegC in 1 DegC increments Two acceleration speeds, three deceleration speeds
Maximum Capacity: 8 x 50mL (400ml) with current rotor installed Max RPM: up to 21,000RPM (20,000RPM with current rotor installed) Temp Range: -10 to 40C Rotor Model: JA-20 Rotor