Waters Modules

Injection volume range: 50-ul loop standard; 1,2,5,10,20,100,250-ul loops available
Temperature control: 0.1 to 25.0 C, in 0.1C increments
Digestion Column heater: Accommodates one column up to 50mm length
Digestion column temp control: 10.0C above HDX chamber temperature to 45.0C in0.1C increments

Flow rate range: 200nL/min to 50uL/min
Column trapping pump: choice of 2 eluents

Wavelength range: 190 to 500 nm; accuracy: ±1 nm
Sampling rate: up to 80 points/s
Flow cell design (analytical): light-guiding UPLC intelligent technology flow cell
Flow cell volume: 500 nL; path length: 10 mm
Pressure limit: 1000 psi (all flow cells)

Number of plates: two plates of 96 and 384 microtiter plates / 48 position vial plates / micro-centrifuge tubes /24 position micro-centrifuge tube plates
Maximum sample capacity: 768 in two 384-well plates
Injection volume range: 0.1 to 50.0 uL, in 0.1 uL increments, partial or full loop mode
Sample delivery precision (full loop injection mode): < 0.3% RSD, full loop, standard 10-uL loop (default wash/purge conditions)
Sample temperature control: 4DegC - 40DegC, settable in 0.1 DegC increments (at an ambient temperature of 25DegC)

Injection volume range: 0.1 to 50 uL
Accuracy (aspiration): ±0.2 uL
Number of sample plates: any (2) of the 96 and 384 microtiter plates (other options possible)
Sample compartment: 4 to 40 DegC, settable in 0.1 DegC increments
Temperature accuracy: ±0.5 DegC; stability: ±1.0 DegC at sensor

Number of solvents: up to four solvents in any combination
Solvent degassing: integrated vacuum degassing, four chambers
Gradient formation: low-pressure mixing, quaternary gradient
Gradient profiles: 11 gradient curves
Primary check valve: intelligent Intake Valve (i2 Valve)

Wavelength range: Ex.:200 to 890 nm; Em.: 210 to 900 nm
Measurement range: 0.001 to 10,000 EU
Data acquisition: up to 80 Hz
Flow cell design: axially illuminated, cell volume: <2 uL
Pressure limit: 500 psi

Wavelength range: Ex.:200 to 890 nm; Em.: 210 to 900 nm
Measurement range: 0.001 to 10,000 EU
Data acquisition: up to 80 Hz
Flow cell design: axially illuminated, cell volume: <2 uL
Pressure limit: 500 psi

Column capacity: Single column, up to 150 mm in length, up to 4.6 mm internal diameter (I.D.)
Column compartment temperature range: 5-90DegC, settable in 0.1DegC increments
Column compartment temperature accuracy: ±0.5 DegC at the sensor
Column compartment temperature stability ±0.3 DegC at the sensor
Solvent conditioning: active pre-heating