Formulatrix

Microplate compatibility: 96,- 384-well microplates (Flat, Round, and V-Bottom), deep well
Volume range: 200nL with no upper limit
Dispense Method: non-contact microdiaphragm dispense chips (Qty. up to 6)
Max reagents: dispense up to 6 different reagents; 48 outputs.
Dispense rate for 200 nL to 96-well plate: ~3 seconds; 200 nL to 384-well plate: ~6 seconds; 5 uL to 96-well plate: ~4 seconds; 1 uL to 384-well plate: ~5 seconds

Microplate compatibility: 96,- 384-well microplates (Flat, Round, and V-Bottom), deep well
Volume range: 200nL with no upper limit
Dispense Method: non-contact microdiaphragm dispense chips (Qty. up to 12)
Max reagents: dispense up to 12 different reagents; 96 independently controlled outputs.
Dispense rate for 200 nL to 96-well plate: ~3 seconds; 200 nL to 384-well plate: ~6 seconds; 5 uL to 96-well plate: ~4 seconds; 1 uL to 384-well plate: ~5 seconds

Microplate compatibility: 96,- 384-well microplates (Flat, Round, and V-Bottom), deep well
Volume range: 200nL with no upper limit
Dispense Method: high-volume non-contact microdiaphragm dispense chips (Qty. up to 12) 10 chips installed
Max reagents: dispense up to 12 different reagents; 96 independently controlled outputs.
Dispense rate for 200 nL to 96-well plate: ~3 seconds; 200 nL to 384-well plate: ~6 seconds; 5 uL to 96-well plate: ~4 seconds; 1 uL to 384-well plate: ~5 seconds

Microplate Compatibility: 96, 384, and 1536-well Microplates (Flat, Round, and V-Bottom)
Dispense Method: High-Volume Non-contact microdiaphragm dispense chips (Qty. 12), 96 Independently Controlled Outputs. Dispense any volume of any reagent into any well
Dispense Rate for 5 uL to 96-well plate: ~4 seconds; Dispense Rate for 1 uL to 384-well plate: ~5 seconds; Dispense Rate for 10 uL to 384-well plate: ~9 seconds; Dispense Rate for 20 uL to 384-well plate: ~13 seconds
Max Reagents: Dispense up to 12 different reagents
Power Requirements: 110-240 V, 50-60 Hz, 130 W typical, 200 W max

Microplate Compatibility: 96, 384, and 1536-well Microplates (Flat, Round, and V-Bottom)
Dispense Method: High-Volume Non-contact microdiaphragm dispense chips (Qty. 12), 96 Independently Controlled Outputs. Dispense any volume of any reagent into any well
Dispense Rate for 5 uL to 96-well plate: ~4 seconds; Dispense Rate for 1 uL to 384-well plate: ~5 seconds; Dispense Rate for 10 uL to 384-well plate: ~9 seconds; Dispense Rate for 20 uL to 384-well plate: ~13 seconds
Max Reagents: Dispense up to 12 different reagents
Power Requirements: 110-240 V, 50-60 Hz, 130 W typical, 200 W max

8-channel nanopipettor capable of dispensing drops from 50nL to 1.8uL with CVs averaging 5%
Three powerful, fully-enclosed humidifiers that actively control humidity from ambient to 95%
Can increase humidity from 60% to 85% in under 20 seconds
Dimensions (WxDxH): 653 x 511 x 431 mm; Weight: 38 kg (83.8 lb)
Power Requirements: 110 V - 240 V, 50 Hz - 60 Hz, 130 W typical, 200 W max

Interchangeable chip dispensers
(6) Chip Changers for up to six reagents
Direct Pipette dispensing to chip
(2) Wash Stations
Reliably dispense beads, cells, proteins, enzymes, and high concentration salts

Interchangeable chip dispensers
Direct Pipette dispensing to chip
(2) Wash Stations
Dispense volumes down to 100nL at CV <3%
Plate format: up to 1536-wells including 96- and 384-well plates

Interchangeable chip dispensers
Direct Pipette dispensing to chip
(2) Wash Stations
Dispense volumes down to 100nL at CV <3%
Plate format: up to 1536-wells including 96- and 384-well plates

(26) Interchangeable chip dispensers
(2) Wash Stations
Direct Pipette dispensing to chip
Dispense volumes down to 100nL at CV <3%
Plate format: up to 1536-wells including 96- and 384-well plates, with maximum height of 54 mm.

(26) Interchangeable chip dispensers
(2) Wash Stations
Direct Pipette dispensing to chip
Dispense volumes down to 100nL at CV <3%
Plate format: up to 1536-wells including 96- and 384-well plates, with maximum height of 54 mm.

Interchangeable chip dispensers
Direct Pipette dispensing to chip
(2) Wash Stations
Dispense volumes down to 100nL at CV <3%
Plate format: up to 1536-wells including 96- and 384-well plates

Interchangeable chip dispensers
Direct Pipette dispensing to chip
(2) Wash Stations
Dispense volumes down to 100nL at CV <3%
Plate format: up to 1536-wells including 96- and 384-well plates

Interchangeable chip dispensers
Direct Pipette dispensing to chip
(2) Wash Stations
Dispense volumes down to 100nL at CV <3%
Plate format: up to 1536-wells including 96- and 384-well plates

Interchangeable chip dispensers
Direct Pipette dispensing to chip
(2) Wash Stations
Dispense volumes down to 100nL at CV <3%
Plate format: up to 1536-wells including 96- and 384-well plates

Interchangeable chip dispensers
Direct Pipette dispensing to chip
(2) Wash Stations
Dispense volumes down to 100nL at CV <3%
Plate format: up to 1536-wells including 96- and 384-well plates

(28) Interchangeable chip dispensers
(2) Wash Stations
Direct Pipette dispensing to chip
Dispense volumes down to 100nL at CV <3%
Plate format: up to 1536-wells including 96- and 384-well plates, with maximum height of 54 mm.

Interchangeable chip dispensers
Direct Pipette dispensing to chip
(2) Wash Stations
Dispense volumes down to 100nL at CV <3%
Plate format: up to 1536-wells including 96- and 384-well plates

(2) Wash stations allowing for easy sterilization during dispenses
Reliably dispense beads, cells, proteins, enzymes, and high concentration salts
Sample dispensing into microfuge tubes: 15 mL and 50 mL tubes

Interchangeable chip dispensers
Direct Pipette dispensing to chip
(2) Wash Stations
Dispense volumes down to 100nL at CV <3%
Plate format: up to 1536-wells including 96- and 384-well plates

Interchangeable chip dispensers
Compatible chips: High Volume (HV), Low Volume (LV), High Volume PFE, Low Volume PFE
Vertical deck orientation
The Mantis dispenses into most SBS plates, up to 1536 wells
Power: 24V 10A, Weight: approx 5.4kg (11.8lbs)