- Stock: In Stock
- Brand: Formulatrix
- Product Code: 44939
Here is a Formulatrix Tempest V2 Liquid Handler Nanoliter Multichannel Reagent Dispenser Unit2
This Formulatrix Tempest V2 Liquid Handler is in good working order.
Please see the exact video and photos below.
Testing we performed:
The Formulatrix Tempest V2 Liquid Handler passed all tests and was found to be fully functional:
Power On: PASSED
Software Communications: PASSED
System Prime: PASSED
System Wash: PASSED
Fluid Recovery: PASSED
Fluid Dispense: PASSED
Variable Volume Output Testing: PASSED
Plate Detection: PASSED
System consists of:
Formulatrix Tempest V2 Liquid Dispenser
Plate Stacker Tower (Qty:2)
Computer running Tempest software
Communication and power cables.
Configuration and Setup:
Microplate Compatibility: 96, 384, and 1536-well Microplates (Flat, Round, and V-Bottom)
Dispense Method: High-Volume Non-contact microdiaphragm dispense chips (Qty. 12), 96 Independently Controlled Outputs. Dispense any volume of any reagent into any well.
Dispense Rate for 5 uL to 96-well plate: ~4 seconds
Dispense Rate for 1 uL to 384-well plate: ~5 seconds
Dispense Rate for 10 uL to 384-well plate: ~9 seconds
Dispense Rate for 20 uL to 384-well plate: ~13 seconds
Max Reagents: Dispense up to 12 different reagents.
Power Requirements: 110-240 V, 50-60 Hz, 130 W typical, 200 W max.
Pressure: 30-35 psi @ 0.15 cfm = 2.0 bar @ 4.3 lpm
Vacuum: 22 inHg @ 0.2 cfm= -750 mbar @ 5.7 lpm
Width: 555 mm (22") (625.7 mm (24.5") with optional waste holder)
Depth: 309.67 mm (12.2") (364.67 mm (14.4") with optional tube holder)
Height: 266.56 mm (10.5") (561 mm (22") with plate stackers)
Weight: ~11.5 kg (~25 lb) (~13.5 kg (~30 lb with plate stackers)
The video gives a general overview of the Formulatrix Tempest V2 Liquid Handler and also performs functionality.
This will ship via freight. Please contact us with your zip code to obtain shipping quote.
*SM* Small Crate
Please do not hesitate to contact us if you have any questions.
Here we are showing you our standard packing process
1. All items are different, but they all follow the same principle when packaging.
2. Start with a well-constructed crate
A well-constructed crate would consist of 1/2” to 5/8” Plywood with framing. We generally purchase our crates from a third party who specializes in custom crates.
3. You always want the Instrument to not be directly on the wood deck of the crate. This is done by placing it on foam, inside of the crate. We use 2” 1.7 lb. density foam which works great. It provides cushioning and enough firmness to support the Instrument.
4. The next step is to make sure there is nothing on the deck of the Instrument and the Head/ Arm is secured. In some cases there will be multiple arms to secure but for this example there is only one. The reason for this is so there is no free movement during transit which could cause serious damage to the Instrument.
5. The next step is to make sure your Instrument is covered in either a pallet bag or shrink wrap so no dust or foreign object will get into the crate.
6. The next step is to secure the instrument inside the crate by bracing. We use a method of 2x4’s which have 1” foam shrink wrapped to them so no piece of wood touches the actual instrument.
7. Final step is to photograph everything inside the crate and then seal it with screws.
All equipment warranty request must have a support case opened within the 60-day Domestic USA and 30-day International warranty period.
To open a support case, please send an email to [email protected] or call (508)974-4896.
Please provide your name, contact information, quotation/invoice number and a brief description of the issue that you are experiencing.
Phone and/or Email support will be provided prior to scheduling a return.
Please see the link below for our detailed warranty statement.
Customers must retain all original shipping materials during the warranty period.