Treatment power: 2.5 to 500 Watts Peak Incident Power 0.1 to 250 Watts Average Incident Power Water bath temperature range: 5 - 40DegC Recommended Batch Size: 8 tubes simultaneously processed; 96 tube capacity NGS Sample Volumes: 5 – 320 ul Power requirements: 100-240V 50-60Hz 500VA Max
Sample holder/labware supported: miniTUBE, microTUBE, and 96 microTUBE Plate Treatment power max: average 250W Water bath temperature range: 5 - 40DegC, controllable; Ambient 15 - 45DegC Dimensions (WxDxH): 23 x 30 x 19 in. (59 x 76 x 48 cm.) Power requirements: 100-240V 50-60Hz 500VA Max
Sample Holder/Labware Supported: 130ul microtube, 96-well plates, and as 1ml milliTUBEs Treatment Power: average 100W Water Bath Temperature Range: 5-40C, controllable; Ambient 15-45C Dimensions (WxDxH): 61 x 76 x 48cm (24 x 30 x 19in) Power Requirements: 100-240V 50-60Hz 500VA Max
Sample Holder/Labware Supported: 130ul microtube, 96-well plates, and as 1ml milliTUBEs Treatment Power: average 100W Water Bath Temperature Range: 5-40C, controllable; Ambient 15-45C Dimensions (WxDxH): 61 x 76 x 48cm (24 x 30 x 19in) Power Requirements: 100-240V 50-60Hz 500VA Max
Water bath: distilled or deionized water only Water temp. alarm limit: can be set at +5 DegC to +40 DegC Sample volumes: NGS from 15 to 500 uL (dependent on protocol) Recommended sample capacity: single tube processing Power requirements: 100-240 VAC 500 VA max, 50-60Hz
Water bath: distilled or deionized water only Water temp. alarm limit: can be set at +5 DegC to +40 DegC Sample volumes: NGS from 15 to 500 uL (dependent on protocol) Recommended sample capacity: single tube processing Power requirements: 100-240 VAC 500 VA max, 50-60Hz
Treatment Power: 100W average maximum Water Bath Temperature Range: 5-40C Dimensions (WxDxH): 8x21x13" (20x53x33cm) Power Requirements: 100-240 VAC 500 VA maximum, 50-60Hz
Power Requirements: 100-240VAC, 50-60Hz, 250V T 3A Treatment Power: 100 Watts average power Chiller: connected with 3/8 inch I.D. hoses with quick connect fittings (may be different than seen in pictures and videos) Temperature Range: 5-40C, Water Bath: deionized or distiller water only Dimensions(WxDxH): 8 x 21 x 13in (20 x 53 x 33cm)
Power Requirements: 100-240VAC, 50-60Hz, 250V T 3A Treatment Power: 100 Watts average power Chiller: connected with 3/8 inch I.D. hoses with quick connect fittings (may be different than seen in pictures and videos) Temperature Range: 5-40C, Water Bath: deionized or distiller water only Dimensions(WxDxH): 8 x 21 x 13in (20 x 53 x 33cm)
Sonicator Type: bench-top; high intensity acoustic transducer, temperature monitoring device, circulation pump, water bath with Water Bath: deionized or distilled water only, Temperature Range: 5-40C Chiller Connection: 3/8 inch I.D. hoses with quick connect fittings Power Requirements: 100-240VAC, 50-60Hz, 250V T 3A Dimensions(WxDxH): 8 x 21 x 13in
Sample Processing Capacity: 1 to 8 samples Sample Processing Size: 15ul to 2ml Bath Temperature: Set Point Programmable; +6C to +40C Treatment Power: 2.5 to 75 Watts Peak Incident Power, 0.1 to 20 Watts Average Incident Power; Operates at 500kHz, beyond audible range, no discomfort to users Dimensions (WxDxH): 17 x 14 x 19in (43 x 35 x 48cm); Approximately 40lbs
Sample Processing Capacity: 1 to 8 samples (microTUBE, microTUBE Strip, miniTUBE, milliTUBE) Flexible sample processing volume: 15 ul to 2 ml Water Bath: Automated waterbath management, AFA-grade Water Bath Temperature Set Point: Programmable +6 DegC to +40 DegC Treatment Power: 2.5 to 75 Watts Peak Incident Power, 0.1 to 20 Watts Average Incident Power
Sample Holder: M220 Holder XTU for microTUBES Temperature Range: 5-40C Power Requirement: 100 to 240 VAC, 50 to 60 Hz Dimensions: 12” W x 17” D x 10” H (30 cm x 43 cm x 25 cm) Treatment Power: 75W PIP peak
Sample Holder: *please note: sample holder is not included* Full Treatment Power Range: 2.5 - 75 Watts Treatment Power: 20 Watts Average Incident Power, 75 Watts Peak Incident Power Cycles per Burst Range: 50 - 1000 Temperature Range: 6 to 40C
Sample Holder/Labware Supported: 130ul microtube, 96-well plates, and as 1ml millitubes Treatment Power: average 100W Water Bath Temperature Range: 5-40C, controllable; Ambient 15-32C Dimensions (WxDxH): 61 x 76 x 48cm (24 x 30 x 19in) Power Requirements: 100-240V 50-60Hz 500VA Max
Sample Processing Capacity: Single tube processing NGS Sample Volumes: 15 to 130ul Recommended Batch Size: 1 to 8 samples Treatment Power: 100 Watts Average Power Dimensions 24” W x 30” D x 19” H (61 cm x 76 cm x 48 cm)
Sample Processing Capacity: racks with up to 96 samples Sample Volumes: 50ul to 10ml Recommended Batch Size: 1 to 96 samples Treatment Power: 100 Watts Average Power Dimensions 24” W x 30” D x 19” H (61 cm x 76 cm x 48 cm)
Sample Processing Capacity: Single tube processing NGS Sample Volumes: 15 to 130ul Recommended Batch Size: 1 to 8 samples Treatment Power: 100 Watts Average Power Dimensions 24” W x 30” D x 19” H (61 cm x 76 cm x 48 cm)
Multi-Sample Preparation in tubes, strips or microplates. 1-96 Sample Capacity Treatment Power: 100 Watts Average Power Temperature Range: 5-40C, deionized or distilled water only Dimensions(WxDxH): 24 x 30 x 19in (61 x 76 x 48cm), Weight: 110 lbs (50kg) Power Requirements: 100-240VAC 50-60Hz
Multi-Sample Preparation in tubes, strips or microplates. 1-96 Sample Capacity Treatment Power: 100 Watts Average Power Temperature Range: 5-40C, deionized or distilled water only Dimensions(WxDxH): 24 x 30 x 19in (61 x 76 x 48cm), Weight: 110 lbs (50kg) Power Requirements: 100-240VAC 50-60Hz
Multi-Sample Preparation in tubes, strips or microplates. 1-96 Sample Capacity Treatment Power: 100 Watts Average Power Temperature Range: 5-40C, deionized or distilled water only Dimensions(WxDxH): 24 x 30 x 19in (61 x 76 x 48cm), Weight: 110 lbs (50kg) Power Requirements: 100-240VAC 50-60Hz