Sartorius

Detection technology: Bio-Layer Interferometry (BLI)
16 spectrometers with up to 16 simultaneous reads
Molecular weight: >150 Da
Sample volume: 40-220 uL (depending on plate type)
Microplate positions: 96- and 384-well microplates, two plate positions

Parallel bioreactors: (6x) Biostat B-DCU Univessel SU stations with central DCU tower
Gas control: Advanced Additive Flow 4-gas module with 6 TMFCs and sparger/overlay routing
Agitation range with direct drive: 20-2000 rpm (vessel dependent)
Pumping: Integrated peristaltic pumps for Base, Substrate A & B with gravimetric scale support
Temperature control: 220W heating blankets

Parallel System: 6 bioreactor stations with 6x2L vessels
Gas Control: 4 TMFCs (Thermal Mass Flow Controller), Precision: ±0.3% full scale
Agitation: Direct-drive motors, 20–2000 rpm
Temperature Regulation: external heating blanket and cooling finger with a range from 8 °C above coolant to 60 °C.
Fluid Handling: 4 Watson Marlow 114, fixed speed pumps Base, Acid (5 rpm); Subs-A, Subs-B (44 rpm); rotary switch-controlled.

8 independently controlled single-use bioreactor stations
100–250 mL working volume per vessel
Agitation range 100–4500 rpm; 18–55°C ±0.5°C
pH 2.0–8.5 (±0.02); DO 0–200% air saturation
5 syringe pumps + 1 peristaltic pump per vessel

Parallel System: 4 bioreactor stations for SU vessels
Gas Control: 5 TMFCs (Thermal Mass Flow Controller), Precision: ±0.3% full scale;
Agitation: Direct-drive motors
Temperature Regulation: external heating blanket up to 50 DegC
Fluid Handling: 3 Watson Marlow 114 Easy Load pumps with rotary switch Base (5 rpm); Subs-A, Subs-B (0,15 - 150rpm)

Parallel bioreactors: (2x) Biostat B-DCU fermentation bioreactor stations
4 Gas switching valves sparger to overlay; 4 MFCs (Mass Flow Controllers)
Agitation range with direct drive: 20-2000 rpm (vessel dependent), 2L SU Vessel: 20 – 400 rpm
4 peristaltic pumps with rotary switch: Base, Acid (5 rpm); Subs-A, Subs-B (variable speed)
Temperature control: external (220W) heating blanket

Two 2L Univessel Jacketed Glass bioreactors, 0.4–2L volume
Agitation: 20–2000 rpm, 200W direct-drive motor
Dual gas mixing with 2 solenoid valves, up to 3 LPM
(8) x Watson Marlow 114 pumps for fluid control
2 TMFCs (Thermal Mass Flow Controller), Precision: ±1% full scale; 2 Flow meters; Precision: ±5% full scale on Air and O₂

Two 2L Univessel Jacketed Glass bioreactors, 0.4–2L volume
Agitation: 20–2000 rpm, 200W direct-drive motor
Dual gas mixing with 2 solenoid valves, up to 3 LPM
(8) x Watson Marlow 114 pumps for fluid control
2 TMFCs (Thermal Mass Flow Controller), Precision: ±1% full scale; 2 Flow meters; Precision: ±5% full scale on Air and O₂

4-Gas mixing (Air, O2, N2, CO2) with sparger and headspace outlet (Air,CO2)
5 Flow meters, 3 Mass Flow Controllers
Direct Coupling Drive unit: 200 W motor for 1L–10L Vessel
4 Watson Marlow 114, fixed speed (on|off controlled) peristaltic pumps.
Temperature control range: 8DegC above cooling water to 80DegC via heating blanket

4-Gas mixing (Air, O2, N2, CO2) with sparger and headspace outlet (Air)
5 Flow meters, 4 Mass Flow Controllers
Drive unit: 200 W motor for 1L–10L Vessel,  direct coupling
8 Watson Marlow 114, fixed speed (on|off controlled) peristaltic pumps.
Rotation: SUBS-A1, SUBS-B1, SUBS-C1, SUBS-A2, SUBS-B2 ,SUBS-C2 (5 rpm); BASE-1, BASE-2 (44 rpm)

Two 1L Univessel DW Jacketed Glass bioreactors, 0.35–1L volume
Agitation: 20–2000 rpm, 200W direct-drive motor
2 TMFCs (Thermal Mass Flow Controller), Precision: ±1% full scale; 2 Flow meters; Precision: ±5% full scale on Air and O₂
Dual gas mixing with 2 MFCs, up to 3 LPM each
2 x 4 Watson Marlow pumps for fluid control

Two 1L Univessel DW Jacketed Glass bioreactors, 0.35–1L volume
Agitation: 20–2000 rpm, 200W direct-drive motor
2 TMFCs (Thermal Mass Flow Controller), Precision: ±1% full scale; 2 Flow meters; Precision: ±5% full scale on Air and O₂
Dual gas mixing with 2 MFCs, up to 3 LPM each
2 x 4 Watson Marlow pumps for fluid control

4-Gas mixing with sparger and headspace outlet, 5 Rotameters
Working volume: 0.6-2l; 2x2l vessels
Agitation range with direct drive: 20-2000 rpm for 2l vessel
Temperature control range: 8DegC above cooling water to 80DegC
Rotation: Base-1, Base-2 (40 rpm); A-Foam-1, A-Foam-2 (5 rpm)

Two 1 L Univessel DW Jacketed Glass bioreactors, 0.35–1 L working volume
Agitation: 20-2000 rpm with 200 W direct drive
3 TMFCs (Thermal Mass Flow Controller), Precision: ±1% full scale; 5 Flow meters; Precision: ±5% full scale
Four gas mixing with sparger and headspace outlet (Air)
2 x (3) Watson-Marlow pumps for acid, base, and feed control

Optical Module: green/red
Fluorescence channels: 2; Green: Ex.440-480 Em.504-544 Red: Ex.565-605 Em.625-705
Interchangeable trays: 3; microplate capacity: 6 (6 - 384-well plates)
Objectives: 4x, 10x, 20x objectives, automated turret
Camera Type: Basler Ace 1920-155um 

4-gas mixing (Air, O₂, N₂, CO₂) with sparger & overlay
3 built-in Watson Marlow 114 peristaltic pumps
Univessel SU working volume 0.6 – 2 L
Agitation range 2L SU: 20 – 400 rpm
Temperature control up to 50 °C via heating blanket

Two SU Univessel holders for 0.6–2 L working volume
Agitation: 20–2000 rpm, 200 W direct-drive motor (20–400 rpm for SU)
4 TMFCs (±1% FS) and 5 flow meters (±5% FS) for Air, O₂, N₂, CO₂
3 internal Watson Marlow pumps + 2 external 120U pumps for fluid control
Temperature control via heating blankets up to 50 °C

Operating temperature range: +5 °C to +40 °C
Compatible tubing (dry or liquid-filled): ¼" to 1" OD
Welding cycle time: between 1.5 and 2.5 minutes
Power input: 300 VA
Power requirements: 100–240 VAC, 50/60 Hz, 15A

Operating temperature range: +5 °C to +40 °C
Compatible tubing (dry or liquid-filled): ¼" to 1" OD
Welding cycle time: between 1.5 and 2.5 minutes
Power input: 300 VA
Power requirements: 100–240 VAC, 50/60 Hz, 15A

Operating temperature range: +5 °C to +40 °C
Compatible tubing (dry or liquid-filled): ¼" to 1" OD
Welding cycle time: between 1.5 and 2.5 minutes
Power input: 300 VA
Power requirements: 100–240 VAC, 50/60 Hz, 15A

Operating temperature range: +5 °C to +40 °C
Compatible tubing (dry or liquid-filled): ¼" to 1" OD
Welding cycle time: between 1.5 and 2.5 minutes
Power input: 300 VA
Power requirements: 100–240 VAC, 50/60 Hz, 15A