Detector type: DAD Standard: 13 ul volume, 10 mm cell path length and 120 bar (1760 psi) pressure maximum Analog outputs Recorder/integrator: 100 mV or 1 V, output range0.001 Â 2 AU, two outputs Wavelength range: 190 Â 950 nm, Linear absorbance range > 2 AU (upper limit) Chromatography Type: HPLC
Detection: Photomultiplier (PMT) Light Source: Blue LED Elapsed Time Counter Temperature Range: ambient to 100C Eluent Flow Rate: 5uL/min to 5mL/min Chromatography Type: HPLC
Sample capacity: 2 x MTP well plates + 10 x 2ml, 100 x 2ml in one tray, 40 x 2ml in half tray Injection Range: 0.01 to 8ul in 0.01ul increments with small loop capillary, 0.01 to 40ul in 0.01ul increments with extended loo Precision: Typically < 0.5% RSD of peak areas from 5 to 40ul, Typically < 1% RSD from 1 to 5 ul, Typically < 3% RSD fro Sample Viscosity Range: 0.2 to 5 cp Injection cycle time: Typically < 30 sec using standard conditions (4ul/min draw speed, 10ul/min eject speed, 0.1ul injection
Sample capacity: 2 x well-plates (MTP) + 10 x 2 ml vials, 100 x 2 ml in one tray, 40 x 2 ml in half tray Injection range: 0.1 - 100 ul in 0.1 ul increments, Up to 1500 ul with multiple draw (hardware modification required) Precision: Typically < 0.5 % RSD of peak areas from 5 - 100 ul, Typically < 1 % RSD from 1 - 5 ul Sample viscosity range: 0.2 - 5 cp Injection cycle time: Typically < 30 s using following standard conditions, Default draw speed: 200 ul/min, Default eject spe
Number of Samples: up to 126 vials (16x100mm, 16x48mm) Operating Altitude: up to 2000 m (6500 ft) Humidity: < 95 %, @ 25 - 40 C (77 - 104 F) Ambient operating temperature: 4 - 45 C (41 - 113 F)
Hydraulic system : Two dual piston in series, with proprietary servo-controlled variable stroke drive, floating piston, active i Pressure range : 20 to 400 bar (5880 psi) system pressure Solvent channels : 4 Settable column flow range : 0.01 - 4 ul/min, 1 - 2500 ul/min (with the electronic flow control bypassed) Composition precision : less than 0.2 percent SD, at 500 nl/min (default settings), Minimum primary flow/pump channel is 5 ul/mi
Hydraulic system : Two dual piston in series, with proprietary servo-controlled variable stroke drive, floating piston, active i Pressure range : 20 to 400 bar (5880 psi) system pressure Solvent channels : 4 Settable column flow range : 0.01 - 4 ul/min, 1 - 2500 ul/min (with the electronic flow control bypassed) Composition precision : less than 0.2 percent SD, at 500 nl/min (default settings), Minimum primary flow/pump channel is 5 ul/mi
Two independent pump channels, (two solvents per pump channel), electronic flow control for flow rates up to 4 uL/min: settable Pressure range 20 - 400 bar (5880 psi) system pressure Optimum composition range - 1 - 99 % or 5 uL/min per channel (primary flow), whatever is greater Communications Controller-area network (CAN), RS-232C, APG Remote: ready, start, stop and shut-down signals Dimensions (height-width-depth): 180 x 345 x 435 mm (7 x 13.5 x 17 inches)