Max Capacity Volume Range: up to - 9L (8L with current rotor) Maximum Speed: 10,000 RPM (5,000 RPM with current rotor) Maximum g-Force: 17100g Temperature Range: from -10C to +40C Timed Run: 1 min to 99 hrs, 59 mins (timed run); Total centrifuge effect (g-seconds) or Continuous hold
Rotor model installed: JLA-10.500 rotor Maximum capacity: 4L (6 tubes x 500mL (3000ml) with current rotor installed) Set RPM speed: 300 to 21.000 RPM in 10-RPM increments (10.000RPM with current rotor installed) Temp range: -10 to +40 DegC in 1 DegC increments Two acceleration speeds, three deceleration speeds
Rotor model installed: JA-25.50 rotor Maximum capacity: 4L (8 tubes x 50mL (400ml) with current rotor installed) Set RPM speed: 300 to 21.000 RPM in 10-RPM increments (max. 21.000 RPM with current rotor installed) Temp range: -10 to +40 DegC in 1 DegC increments Two acceleration speeds, three deceleration speeds
Max Capacity 6 x 250 mL (40 x 6mL w/ current TFT 45.6 rotor installed) Max Speed: 80,000 RPM (45,000 w/ current TFT 45.6 rotor installed) Temperature Range: 0 to 40C Rotor Model: Sorvall TFT 45.6 Fixed Angle Rotor (45,000 RPM)
Cell Capacity per Cycle (CHO): up to 80 Billion Flow Rate: 114 L/hr Maximum Centrifugal Force: 1,000 g Volumes: chamber volume 400 mL (4 x 100 mL), working volume 0.1 - 500 L Power Requirements: 208 - 240 V1 Ph; 20A
Maximum RPM: 90,000 (current rotor rated for 70,000rpm only) Temperature Setting: 0 to 40C in 1C increments Temperature Control (after equilibration): +/-0.5C over entire set temperature range (+/-0.8C over entire set temperature for SW-32 rotor) Accel. + Decel. Profiles: 10 Acceleration Rates, 11 Deceleration Rates Integrated Software: Optima XPN-90 Ultracentrifuge v1.1.185