Agilent 1260 Infinity ll GPC System with Variable Wavelength and Refractive Index Detectors

For Sale Agilent 1260 Infinity ll GPC System with Variable Wavelength and Refractive Index Detectors

Pre-owned instrument

• Fully Functional
• Current model
• Serviced & in Stock
• Good cosmetic condition
• Warranty
• An extended warranty option and training may be available.

Here is what you will receive:

• Agilent 1260 Infinity II Isocratic Pump p/n: G7110B
• Agilent 1260 Infinity II Vialsampler p/n: G7129A
• Agilent InfinityLab Sample Thermostat p/n: G7167-60101
• Agilent 1260 Infinity II Multicolumn Thermostat p/n: G7116A
• JASCO Column Oven p/n: CO-4060
• Agilent 1260 Infinity II Variable Wavelength Detector p/n: G7114A w/ Standard flow cell 10 mm, 14 μL, 40 bar (G1314-60186)
• Agilent 1260 Infinity II Refractive Index Detector p/n: G7162A
• Solvent bottle tray
• InfinityLab system tool kit for Infinity II LC instruments
• Computer running Astra 7.3 and Agilent OpenLab CDS
• Power and communication cables

Agilent 1260 Infinity ll GPC System Configuration:

• Detector modules: Variable Wavelength, Refractive Index Detector
• Flow range: 0.2 to 10 mL/min
• Injection range: 0.1-100 uL
• Pump type: isocratic
• Maximum Number of Temperature Zones: 2  
• System pressure operating range: up to 600 bar

Agilent 1260 Infinity II Isocratic Pump:

• Hydraulic system: dual piston in series pump with servo-controlled variable stroke drive, power transmission by gears and ball screws, floating pistons 
• Settable flow range: set points 0.001-10 mL/min, in 0.001 mL/min increments 
• Recommended flow range: 0.2-10.0 mL/min 
• Flow precision: ≤0.07% RSD, or ≤0.02 min SD whichever is greater, based on retention time at constant room temperature 
• Flow accuracy: ± 1% or 10 uL/min, whichever is greater, pumping degassed H₂O at 10 MPa (100 bar) 
• Pressure operating range: Operating range up to 60 MPa (600 bar, 8700 psi) up to 5 mL/min; up to 20 MPa (200 bar, 2950 psi) up to 10 mL/min 
• Pressure pulsation < 2 % amplitude (typically < 1.3 %), or < 0.3 MPa (3 bar, 44 psi), whatever is greater, at 1 mL/min isopropanol, at all pressures > 1 MPa (10 bar, 145 psi) 
• Compressibility compensation: user-selectable, based on mobile phase compressibility
• Weight 14.0 kg (31 lbs) 
• Dimensions (H×W×D): 18 x 39.6 x 43.6 cm. (7.1 x 15.6 x 17.2 in.)
• Power requirements: 100 – 240 V~, ± 10 % 50/60 Hz, ± 5 % 80 VA, 65 W

Agilent 1260 Infinity II Vialsampler:

• Injection range: 0.1-100 uL in 0.1 uL increments with 100 uL up to 60 MPa; 0.1-900 uL in 0.1 uL increments with 900 uL up to 40 MPa
• Injection precision: <0.25 % RSD of peak areas from 5 uL to 100 uL
• Pressure range: 0-60 MPa (0-600 bar, 0-9702 psi); 0 - 40 MPa (0 - 400 bar, 0 - 5801 psi)
• Sample viscosity range: 0.2 - 5.0 cP
• Sample capacity: 132 x 2 mL vial
• Carryover: <0.004 % (40 ppm) with needle wash
• Injection cycle time: 18s. for draw speed 200 uL/min
• Ejection speed: 200 uL/min 
• Injection volume: 1 uL
• Minimum sample volume: 1 uL from 5 uL sample in 100 uL microvial, or 1 uL from 10 uL sample in 300 uL microvial
• Weight: 19 kg (41.9 lbs) 
• Dimensions (H×W×D): 32 x 39.6 x 46.8 cm. (12.8 x 15.6 x 18.4 in.) 
• Power requirements: 100 – 240 V~, ± 10 % 50/60 Hz, ± 5 % 350 VA, 350 W, 1195 BTU/h

Agilent 1260 Infinity II Sample Thermostat:

• Operating principle: high-performance, low-energy consumption micro-compressor based cooler with natural R600a coolant (Isobutane max. 0.030 kg)
• Temperature range: from 4 DegC to 40 DegC
• Temperature settable: from 4 DegC to 40 DegC in 1DegC increments
• Temperature accuracy: 2 DegC to 6 DegC at a setpoint of 4 DegC

Agilent 1260 Infinity II Multicolumn Thermostat:

• Operating principle: thermostatted column compartment with dual, independent Peltier-element. Solvent pre-heating and still-air operation for reduction of chromatographic band-broadening under UGPC conditions. 
• Temperature range: 10 DegC below ambient (minimum 4 DegC) to 85 DegC
• Temperature range increment: settable in steps of 0.1 DegC
• Temperature stability ±0.1 DegC
• Temperature accuracy ±0.5 DegC (with calibration at 40 DegC)
• Temperature precision 0.05 DegC
• Independent temperature zones: 2 in single device
• Column capacity: 4 columns of up to 300 mm length plus InfinityLab Quick Connect fittings or pre-column.
• Heat-up/cool-down time: 5 min from ambient to 40 DegC; 10 min from 40 DegC to 20 DegC; 25 min from 25 DegC to 85 DegC
• Weight: 12.5 kg (27.6 lbs) 
• Dimensions: (H×W×D): 16 x 43.5 x 43.6 cm. (6.3 x 17.1 x 17.2 in.)
• Power requirements: 100 – 240 V~, ± 10 % 50/60 Hz, ± 5 %, 150 VA, 150 W

JASCO Column Oven:

• The CO-4060 can accommodate up to 6 columns with lengths up to 300mm or larger ID preparative columns
• Temperature control range: room temperature -15 DegC or 4 DegC (whichever is higher) to 80 DegC
• Temperature setting range: 4 DegC to 80 DegC  0.1 DegC increments
• Temperature control precision: ±0.1 DegC (when the temperature is set to 40 DegC)
• Dimensions (WxDxH): 15 x 47 x 46.5 cm
• Weight: 16 kg
• Power requirements: 100 – 240 V, 50/60 Hz, 350 VA

Agilent 1260 Infinity II Variable Wavelength Detector:

• Detection type: double-beam photometer
• Light source: deuterium lamp
• Number of signals: single and dual wavelength detection
• Maximum data rate: 120 Hz (single wavelength detection) 2.5 Hz (dual wavelength detection)
• Short-term signal noise (ASTM): <±0.25·10^-5 AU, at 230 nm (single wavelength detection); <±0.80·10^-5 AU, at 230 nm and 254 nm (dual wavelength detection)
• Drift: <1·10^-4 AU/h, at 230 nm
• Linear absorbance range: >2.5 AU upper limit
• Wavelength range: 190 - 600 nm 
• Wavelength accuracy: ±1 nm, self-calibration with deuterium lines, verification with holmium oxide filter 
• Wavelength precision: <±0.1 nm
• Slit width: 6.5 nm typical over whole wavelength range 
• Time programmable: wavelength, polarity, peak width, lamp on/off
• Flow cell: standard:14 uL volume, 10 mm cell path length and 40 bar (580 psi) pressure maximum
• Weight: 11 kg (24.3 lbs) 
• Dimensions (H×W×D): 14 x 39.6 x 43.6 cm (5.5 x 15.6 x 17.2 in.) 
• Power requirements: 100 - 240 V ± 10 %, 50/60 Hz ± 5 %, 80 VA, 70 W

We also have a high-pressure flow cell with a 14 uL volume, 10 mm cell path length, and a maximum pressure of 400 bar (5800 psi). Please inquire with our sales team.

Agilent 1260 Infinity II Refractive Index Detector:

• Detection type: refractive Index
• Refractive index range: 1.00 - 1.75 RIU, calibrated 
• Measurement range: ±600·10^-6 RIU 
• Optical zeroing: digitally via software, manually via set screw
• Optics temperature control: 5 DegC above ambient to 55 DegC
• Sample cell volume: 8 uL, maximum pressure: 5 bar (0.5 MPa), maximum flow rate: 5 mL/min 
• Valves: Automatic purge and automatic solvent recycle
• Volumes: Inlet port to sample cell 62 uL, inlet port to outlet port 590 uL 
• pH range 2.3 - 9.5 
• Short term noise: <±1.25·10^-9 RIU
• Drift: <200·10^-9 RIU/hr 
• Time programmable parameters: polarity, peak width 
• Maximum data rate: 74 Hz
• Weight 14.7 kg (32.4 lbs) 
• Dimensions (H×W×D) 18 x 39.6 x 43.6 cm (7.1 x 15.6 x 17.2 in.) 
• Power requirements: 100 – 240 V ± 10 %, 50/60 Hz ± 5 %, 80 VA/ 70 W

Customization/Options:

• Other detectors and flow cell options might be available. Please inquire with our sales team.

Testing performed by our in-house service team:

• We inspect the Agilent 1260 Infinity ll GPC System for physical damage.
• We check for seamless communication with the software.
• We run samples and tests that allow us to perform IQ/OQ/PQ.

Agilent 1260 Infinity II Isocratic Pump:

• We check to ensure the proper initialization of the pump.
• We verify successful communication with software.
• We confirm the proper functionality of the solvent selection valve
• We test and validate the performance of the seal-washing pump
• We perform system leak tests to ensure there are no leaks.
• We validate the leak sensor's functionality.
• We verify the degasser's functionality.
• We test the pressure limiter's effectiveness.
• We confirm the accuracy of flow rates.
• We ensure stable solvent delivery.

Agilent 1260 Infinity II Sample Thermostat:

• We ensure successful initialization.
• We verify communication integrity.
• We perform a sample cooler set temperature accuracy test to confirm temperature accuracy.
• We conduct a sampler leak test to check for no leaks in the sampler.
• We validate the reproducibility of sample handling processes.

Agilent 1260 Infinity II Multicolumn Thermostat:

• We ensure the successful initialization of the system.
• We verify the communication functionality with the control software.
• We assess the efficiency and reliability of the cooling and heating functionality.
• We validate the accuracy of the column oven temperature control.
• We confirm the proper functioning of the leak sensor to detect any leaks in the system.

JASCO Column Oven:

• We ensure the column oven initializes properly and is ready for operation.
• We verify the accuracy of temperature control within the column oven.
• We confirm the functionality of the leak sensor to detect any potential leaks in the oven.

Agilent 1260 Infinity II Variable Wavelength Detector:

• We ensure the detector initializes correctly upon startup.
• We verify seamless communication between the detector and control software.
• We confirm that calibration settings are accurate and consistent.
• We assess the detector's stability by measuring noise levels and drift over time.
• We validate the detector's ability to measure signal intensity accurately.
• We check the integrity and performance of the detector's optical cell.
• We verify the leak sensor's functionality to detect any leaks in the detector.

Agilent 1260 Infinity II Refractive Index Detector:

• We verify the proper initialization of the detector upon startup.
• We check seamless communication between the detector and the control software.
• We assess the stability of the detector by measuring noise levels and drift over time.
• We validate the functionality of the leak sensor to detect any leaks within the detector system.

Instrument Overview:

• The system integrates Agilent 1260 Infinity II Variable Wavelength Detector for precise absorbance data.
• Agilent 1260 Infinity II Refractive Index Detector enhances sensitivity and accuracy in detection.
• The configuration supports a wide range of solvent compatibilities and operational temperatures.

Instrument Application:

• Pharmaceutical Analysis
• Quality Control
• Environmental Testing
• Water Quality Analysis
• Air Quality Monitoring
• Food and Beverage Analysis
• Food Safety
• Chemical Analysis
• Chemical Composition
• Life Sciences Research
• Proteomics and Metabolomics
• Genomics
• Clinical Diagnostics
• Clinical Chemistry
• Forensic Analysis
• Drug Testing

The key features of Agilent 1260 Infinity ll GPC System:

• Gel Permeation Chromatography
• Variable wavelength detection.
• Refractive index detection capability.
• Precise analytical results.
• Advanced chromatographic separations.

Additional technical info:

• Brochure: Agilent 1260 Infinity ll GPC System Brochure
• Manual: Agilent 1260 Infinity II Isocratic Pump Manual
• Manual: Agilent 1260 Infinity II Vialsampler Manual
• Manual: Agilent 1260 Infinity II Multicolumn Thermostat Manual
• Brochure: JASCO Column Oven Brochure
• Manual: Agilent 1260 Infinity II Variable Wavelength Detector Manual
• Manual: Agilent 1260 Infinity II Refractive Index Detector Manual

Video Overview:

About us

How we pack

Why should you buy from us?

• We have experience servicing and repairing these instruments.
• This instrument goes through all the described service steps before shipping.
• We offer detailed photos and videos of the instruments you buy.
• We are an approved pre-owned equipment vendor to many large US, Canadian, and EU Universities.
• We are an approved pre-owned equipment vendor to many Fortune 500 US and International Biopharma companies.
• Many upgrade and repair parts are in stock.
• Remote installation and instrument operation training are available.
• On-site installation may be available in the Boston Area (New England area)
• US or International shipping is no problem (see the shipping tab on how we pack and feel at ease)

• It will work!
• Warranty
• An extended warranty may be available.
• You get after-sales technical support.
• Smooth process from the initial quote to order fulfillment.
• Customer references are available.

COMMON QUESTIONS AND ANSWERS BELOW