Your Cart

Teledyne ISCO ACCQPrep HP150 UV Preparative LC System w/ 2x2 Autosampler - AV

Teledyne ISCO ACCQPrep HP150 UV Preparative LC System w/ 2x2 Autosampler - AV
Teledyne ISCO ACCQPrep HP150 UV Preparative LC System w/ 2x2 Autosampler - AV
  • Stock: In Stock
  • Brand: Teledyne Isco
  • Product Code: 50954
  • Condition: Pre-Owned

Here is a Teledyne ISCO ACCQPrep HP150 UV Preparative LC System with 2x2 Autosampler

Predecessor to:
Current model

This Teledyne ISCO ACCQPrep HP150 UV Preparative LC System is in good working condition.

Please see exact photos and video below.

The testing we performed:
The Teledyne ISCO ACCQPrep HP150 UV Preparative LC System passed all tests and was found to be fully functional:
Power and Initialization: PASSED
Touch screen: PASSED
UV Detection of Sodium Iodide sample: PASSED
Arm movement: PASSED
Sample rack detection: PASSED
Waste/source level sensing: PASSED
Gradient test: PASSED
Communication with autosampler: PASSED
Autosampler sample distrubution: PASSED
Autosampler sample asperate: PASSED

The system consists of:
Teledyne ISCO ACCQPrep HP150 LC System
Teledyne ACCQPrep 2x2 Autosampler module
Intake hoses with caps and solvent filters (Qty.:6)
Autosampler 2x28 sample rack
Teledyne 25 x 150mm 50mL vial racks (Qty.:4)
Set of waste hoses
Power cable

*Note: Glassware, test tubes, and column not included*

You can purchase different size racks from Teledyne or if we have them in stock they can be swapped out.

Configuration and Setup:
Max flow rate: 150mL/min
Flow Rate Accuracy: +/- 2%
Pressure limit: up to 6000 psi (414 bar) lower pressure limits user defined
Ambient Temperature: 20 to 40 DegC
UV Detection Wavelength: 200 to 400 nm, in +/-5 nm increments
Number of Solvents: Binary gradient, 2 solvents.
A two component gradient can be formed from up to six solvents with the included AutoSampler where up to four collection racks can be used.
Programmable Gradients: Linear, step, isocratic
Gradient Linearity: +/-1%
Sample introduction: 5mL loop, external auto sampler
Dimensions (H x W x D): 27.5 x 14.0 x 20.0 in (69.9 x 35.6 x 50.8 cm)
Weight: 84.5 lbs (38.2 kg)
Dimensions Autosampler Module AS 2x2 (H x W x D): 18.9 x 14.0 x 19.3 in (48.0 x 35.6 x 49.0 cm)
Weight: 31.1 lbs (14.1 kg)
Power requirements: 100-240VAC 50/60Hz

Video Description:
The video below gives an overview of the Teledyne ISCO ACCQPrep HP150 LC System system, and also demonstrates its functionality.

Datasheet: N/A

Brochure: Teledyne ISCO ACCQPrep HP150 LC System

Manual: Teledyne ISCO ACCQPrep HP125 LC System

Installation Guide: Teledyne ISCO ACCQPrep HP150 LC System

This will ship via freight. Please contact us with your zip code to obtain shipping quote.

*SM* Small Crate

Please do not hesitate to contact us if you have any questions.

All equipment warranty request must have a support case opened within the 60-day warranty period.
To open a support case, please send an email to [email protected] or call (508)974-4896.
Please provide your name, contact information, quotation/invoice number and a brief description of the issue that you are experiencing.
Phone and/or Email support will be provided prior to scheduling a return.
Please see the link below for our detailed warranty statement.
Customers must retain all original shipping materials during the warranty period.

Every instrument has unique packing and shipping needs. Few instruments can be safely shipped via Pacel, and most require the safety of a well-built crate.

Here we are showing you our standard packing process  

      1. All items are different, but they all follow the same principle when packaging.

      2. Start with a well-constructed crate

A well-constructed crate would consist of 1/2” to 5/8” Plywood with framing. We generally purchase our crates from a third party who specializes in custom crates.

      3. You always want the Instrument to not be directly on the wood deck of the crate. This is done by placing it on foam, inside of the crate. We use 2” 1.7 lb. density foam which works great. It provides cushioning and enough firmness to support the Instrument.

      4. The next step is to make sure there is nothing on the deck of the Instrument and the Head/ Arm is secured. In some cases there will be multiple arms to secure but for this example there is only one. The reason for this is so there is no free movement during transit which could cause serious damage to the Instrument.

      5. The next step is to make sure your Instrument is covered in either a pallet bag or shrink wrap so no dust or foreign object will get into the crate.

      6. The next step is to secure the instrument inside the crate by bracing. We use a method of 2x4’s which have 1” foam shrink wrapped to them so no piece of wood touches the actual instrument.

      7. Final step is to photograph everything inside the crate and then seal it with screws.


Safe Shipping
From Small Packages to Large Freight
International Shipping
Happy customers all around the world
Registered Vendor To
Many US Colleges, Universities and Fortune 500 Companies