Obducat QS200 Quickstep Spinner & Hotplate Platform Spin Coater

We verify various instrument functions individually and together, performing necessary repairs or maintenance to bring the instrument to our quality standards..

• We powered on the unit, and the control software booted successfully.
• We tested the touchscreen functionality.
• We initialized the hot plate, including the pin lift and home position.
• We verified the hot plate temperature controls, including target temperature, actual temperature, and temperature over time.
• We initialized the chuck, including the home position and pin lift, and tested its controls for speed and acceleration.
• We checked the chuck cover initialization and verified its controls for closed, middle, and open positions.
• We tested the media dispense arm initialization and confirmed its control functions for lifting and rotating.
• We tested the syringe dispenser and its controls, including home position, dispense volume, velocity, and suck-back volume/velocity.
• We created and programmed process recipes, defining parameters such as spin speed, acceleration, dispense volume, temperature, and timing.
• We verified the vacuum controls on the hot plate and chuck.

We invite you to visit our facility for an on-site demo or feel free to request a virtual Zoom demo of the instrument you are interested in.

Warranty Terms:

• The instrument comes fully warranted for both parts and labor.
• The customer should retain all packing materials during the warranty period.

• Make sure the instrument is properly packed for shipping and will arrive safely. If the instrument is large, request to have it packed in a wooden crate.
• Confirm that there is no physical damage or any misaligned internal components.
• Ask what accessories are included.
• Ask how long the warranty is and what it covers.

Here is what our technical team tests so you can request something similar and ensure your instrument will be fully functional.

• We powered on the unit, and the control software booted successfully.
• We tested the touchscreen functionality.
• We initialized the hot plate, including the pin lift and home position.
• We verified the hot plate temperature controls, including target temperature, actual temperature, and temperature over time.
• We initialized the chuck, including the home position and pin lift, and tested its controls for speed and acceleration.
• We checked the chuck cover initialization and verified its controls for closed, middle, and open positions.
• We tested the media dispense arm initialization and confirmed its control functions for lifting and rotating.
• We tested the syringe dispenser and its controls, including home position, dispense volume, velocity, and suck-back volume/velocity.
• We created and programmed process recipes, defining parameters such as spin speed, acceleration, dispense volume, temperature, and timing.
• We verified the vacuum controls on the hot plate and chuck.

We recommend inspecting the instrument in person or requesting a virtual demo; this will allow you to evaluate the condition and performance of the instrument you are considering purchasing.

• This is a common model, and we generally stock multiple instruments, accessories, and many replacement parts to back up our warranty.

We acknowledge that sometimes you can purchase this model instrument elsewhere, possibly for less.

Here are some of the reasons for our price.

• We may offer longer warranty terms.
• We cover shipping costs during the warranty period. (Customer is required to save packing materials for the duration).
• We have to have technical staff that can do the testing/repairs and after-sales support if there are any issues.
• We invest considerable time into the testing and service of each instrument we sell.
• We have to purchase various testing supplies (often expensive) to perform testing.
• We have to purchase any missing required accessories to make the instruments complete.
• We have to procure and stock service parts to support our warranty.
• We have extensive experience packing sensitive instruments. See the shipping section in the website menu for info on how not to pack.
• We guarantee that the instrument will be functional.

• If you are a US or Canadian customer, we are likely already a registered vendor in your University's vendor system. This would greatly expedite the process of PO approvals and get this instrument into your lab faster.
• POs are accepted from US and Canadian universities.

• We can ship within a few days to two weeks. Shipping time depends on the current demand for our instruments. Members of our sales team will be able to offer current delivery estimates.

• All instruments shipped within the USA and internationally are fully insured. This applies as long as we are the shipper and handle shipping arrangements.
• If the buyer handles shipping, then shipping insurance responsibility falls to the buyer; we highly advise that the buyer obtain shipping insurance from their carrier.

Packing

• Most larger instruments ship in fully enclosed ISPM15-certified wooden crates with proper padding underneath, and the sides have moving components braced.
• Accessories are packed safely in boxes with padding and then safely packed inside the crate.
• We may not use a crate for local deliveries to save you money *if delivered by us.
• We often use “tilt’ & “shock” indicators on the crates to ensure the crate has not been excessively tilted and dropped where equipment may suffer damage.
• Photos are taken during the packing process to make sure nothing is missed.

USA/Canada Shipping

• Within the US and Canada, we will ship via selected freight carriers. We do not use low-price/high-damage carriers as we want the equipment to get safely to you.

International Shipping

• Internationally, we will only ship via Air Freight or Air Parcel (such as UPS or DHL), which provides reliability, no exposure to Ocean weather, and timely delivery.
  We have extensive experience packing and shipping fragile instruments globally.

Our experience and process

• We have safely packed and shipped thousands of sensitive analytical instruments.

A lot…and it is undoubtedly worth it, and here is why. Feel free to ask for feedback from hundreds of customers who bought from us.

• You will pay less than half vs. buying a new instrument. Why not spend leftover funds on another instrument for your lab?
• You will get our standard warranty, plus, when available, an option to obtain an extended warranty agreement.
• Know that your instrument was tested and working the day it left our facility and is covered if there are faults.
• Get extra peace of mind by adding an extended warranty or service agreement when such an option is available.

• Well, this one is easy: buying a pre-owned instrument is great for the planet; you are reducing unnecessary waste, CO² output, and water use that would be used during the manufacturing process.

Absolutely! Please give us a call (1-617-397-3486) or complete this form to get your questions answered or receive a formal Quote.