Menu
Your Cart

Nikon Ti-E Fluorescence Motorized DIC Polarization Microscope - AV

Nikon Ti-E Fluorescence Motorized DIC Polarization Microscope - AV
Nikon Ti-E Fluorescence Motorized DIC Polarization Microscope - AV
  • Stock: In Stock
  • Brand: Nikon
  • Product Code: 25153
  • Availability:1
$32,995.00

Here is a Nikon Ti-E Fluorescence Motorized DIC Polarization Microscope

Setup for Brightfield with Fluorescence, DIC and Polarization studies.

The Prior XY motorized stage allows for observation of multiple biological sample container sizes including prepared slides and petri dishes.
The Nikon 130w metal halide fluorescence lamp source features intensity and shutter remote controls for ease of use when viewing fluorescence samples.
The high quality Nikon Plan Fluor objectives allow for clear imaging with an overall microscope magnification range of 40 to 200x with the currently installed lenses. (Please inquire for higher magnifications if needed)
Motorized XYZ-Axis, Light Path Switching, Nosepiece, and Fluorescence Turret, with front of base and virtual control within the MicroManager software makes observation switching repeatable and simple.
The 6-position motorized fluorescence turret and 5-position nosepiece allow for additional imaging components to be added in the future to expand this unit for greater focal and spectral ranges.

Predecessor to:
Current model.

Condition:
This Nikon Ti-E Fluorescence Motorized DIC Polarization Microscope is in good working order with all aspects tested and working fully.
Microscope optics have been cleaned professionally under a class 10,000 clean room hood.

Please see the exact video and photos below.

Testing we performed:
The Nikon Ti-E Fluorescence Motorized DIC Polarization Microscope passed all tests and was found to be fully functional:
Tested halogen lamp and source fully: PASSED
Tested metal halide lamp and source fully: PASSED
Tested mechanical condenser and prisms fully: PASSED
Tested motorized filter cube turret fully: PASSED
Tested motorized focal adjustment to limits: PASSED
Tested motorized XY stage to limits: PASSED
Tested all DIC components fully: PASSED
Tested eyepieces for clarity: PASSED
Tested objectives for clarity: PASSED
Tested motorized port splitter to split between all ports: PASSED
Tested motorized shutters and light adjustments: PASSED
Tested motorized fluorescence turret fully: PASSED
Tested all filters and prisms: PASSED
Tested display screen for dead pixels: PASSED
Tested joystick stage control: PASSED
Tested communication to software for virtual control: PASSED
Tested live feed capabilities: PASSED
Tested all motorized control of microscope base: PASSED

During testing this Nikon Ti-E Fluorescence Motorized DIC Polarization Microscope was found to have no issues.
A clear image was produced through the eyepieces as well as through the camera port.
All of the motorized components moved freely and the test sample was able to be focused without excessive effort.

System consists of:
Base:
Nikon TI-E Inverted Microscope
TI-HUBC/A power supply
Head:
TI-TS B Binocular Tube Head
(2) CFI 10x/22 Eyepieces
Prisms / Condenser:
TI-C Condenser LWD 0.52
Prisms: DIC N2
Brightfield path:
TI-DH Illumination Tower
Fluorescence Path:
TI-FL Fluorescence Light Path
Fluorescence:
TI-FLC-E 6 position Motorized Filter Cube Turret
B-2A EX: 470/20 DM: 505 BA: 520 (#F00635)
DAPI EX: 360/20 DM: 400 BA: 460/25 (#F00611)
TRITC EX: 540/25 DM: 565 BA: 605/55 (#F00610)
DIC:
10x/0.30 Plan Fluor DIC L/N1 Objective
DIC N2 Condenser Prism
T-P2 Polarizer
TI-A Analyzer
Illumination:
D-LH/LC 12V 100W Halogen Lamp w/ TI-PS100W power supply
C-HGFIE 130W Metal Halide Lamp w/ HG Controller and light guide
Stage:
PRIOR Motorized XY Stage /E
PRIOR ProScan II Control Box
PRIOR Joystick
Objectives:
6-position Motorized Nosepiece
4x/0.13 Plan Fluor PhL DL (#O2391)
10x/0.30 Plan Fluor DIC L/N1 (#O2476)
20x/0.75 CFI Plan Apo VC (#O0645) (this is a high quality Nikon APO CFI60 Objective, it was originally installed in a custom piece of equipment where manufacturer did not want to show that they used Nikon objectives)
Photo / Port splits:
Left 100% or left/eye 80/20% or right 100% or eye 100%
Camera:
AmScope MU1403 14MP APTINA ultra fine color engine w/ 0.7x DXM Lens
Computer and Software:
Dell Latitude i5 running AmScope software and MicroManager software
Motorized Components:
XY stage, Z axis, Objective turret, Fluorescence turret, Halogen shutter

Communication and power cables.

Configuration and Setup:
Orientation: Inverted
Illumination Type: Brightfield w/ Fluorescence, Polarization, DIC
Objectives: 4x/0.13 Plan Fluor PhL DL, 10x/0.30 Plan Fluor DIC L/N1, 20x/0.75 CFI Plan Apo VC
Light Sources: 12V 100W Halogen Lamp, C-HGFIE Mercury Lamp
Stage: Motorized XY

This Nikon Ti-E Fluorescence Motorized DIC Polarization Microscope is currently set up for Brightfield with Fluorescence, Polarization and DIC studies.
The AmScope MU1403 camera is capable of taking detailed digital images.

Video Description:
The video starts with a wide front view of the Nikon Ti-E Fluorescence Motorized DIC Polarization Microscope.
After that camera pans closer to observe each component of the Nikon Ti-E Fluorescence Motorized DIC Polarization Microscope system.
We demonstrate functionality of all controls, and finally show control of the Nikon Ti-E Fluorescence Motorized DIC Polarization Microscope via software.

Documentation:
Datasheet: N/A

Brochure: https://drive.google.com/file/d/0Bz5srQzgsa6uMFktQ0xqSlpzVlU/view?usp=sharing

Manual: https://drive.google.com/file/d/0Bz5srQzgsa6uV19uRDFySTFGTzQ/view?usp=sharing

This will ship via freight. Please contact us with your zip code to obtain shipping quote.

*SM* Small Crate
OB Packed Weight - 300lb

Please do not hesitate to contact us if you have any questions.
 


 

 

 

Here we are showing you our standard packing process  

      1. All items are different, but they all follow the same principle when packaging.

      2. Start with a well-constructed crate

A well-constructed crate would consist of 1/2” to 5/8” Plywood with framing. We generally purchase our crates from a third party who specializes in custom crates.

      3. You always want the Instrument to not be directly on the wood deck of the crate. This is done by placing it on foam, inside of the crate. We use 2” 1.7 lb. density foam which works great. It provides cushioning and enough firmness to support the Instrument.

      4. The next step is to make sure there is nothing on the deck of the Instrument and the Head/ Arm is secured. In some cases there will be multiple arms to secure but for this example there is only one. The reason for this is so there is no free movement during transit which could cause serious damage to the Instrument.

      5. The next step is to make sure your Instrument is covered in either a pallet bag or shrink wrap so no dust or foreign object will get into the crate.

      6. The next step is to secure the instrument inside the crate by bracing. We use a method of 2x4’s which have 1” foam shrink wrapped to them so no piece of wood touches the actual instrument.

      7. Final step is to photograph everything inside the crate and then seal it with screws.

 

All equipment warranty request must have a support case opened within the 60-day Domestic USA and 30-day International warranty period.
To open a support case, please send an email to [email protected] or call (508)974-4896.
Please provide your name, contact information, quotation/invoice number and a brief description of the issue that you are experiencing.
Phone and/or Email support will be provided prior to scheduling a return.
Please see the link below for our detailed warranty statement.
Customers must retain all original shipping materials during the warranty period.

Safe Shipping
From Small Packages to Large Freight
International Shipping
Happy customers all around the world
Warranty
60-day Domestic USA and
30-day International
Registered Vendor To
Many US Colleges, Universities and Fortune 500 Companies