Menu
Your Cart

Nikon TE2000-S Inverted Fluorescence Phase Contrast Microscope Pred Ti

Nikon TE2000-S Inverted Fluorescence Phase Contrast Microscope Pred Ti
Nikon TE2000-S Inverted Fluorescence Phase Contrast Microscope Pred Ti
  • Stock: In Stock
  • Brand: Nikon
  • Product Code: 24131
  • Availability:1
$9,495.00

Here is a Nikon TE2000-S Inverted Fluorescence Phase Contrast Microscope Pred Ti

Setup for Brightfield with Phase Contrast and Fluorescence studies.
This microscope is optimized for biological studies where additional contrast methods are required.
The T-SAM mechanical stage has a travel distance of 126 x 84mm. The custom stage insert will accommodate slides, petri dish, or wellplate.
The total magnification of this system is 40 to 200x
The 100W mercury lamp housing will come with a new in box 100w mercury bulb (installation required).

Predecessor to:
Ti series

Condition:
This Nikon TE2000-S Inverted Fluorescence Phase Contrast Microscope is in good working order with all aspects tested and working fully.
Microscope and optics have been professionally cleaned under a class 10,000 clean room hood.

Please see the exact video and photos below.

Testing we performed:
The Nikon TE2000-S Inverted Fluorescence Phase Contrast Microscope passed all tests and was found to be fully functional:
Tested halogen lamp and source: PASSED
Tested mercury lamp and source: PASSED
Tested port splitter to split between all ports: PASSED
Tested connection from computer to camera for live feed: PASSED
Tested mechanical XY stage: PASSED
Tested mechanical objective turret: PASSED
Tested objectives for clarity: PASSED
Tested eyepieces for clarity: PASSED
Tested live feed for clarity: PASSED
Tested fluorescence light path and shutters: PASSED
Tested mechanical fluorescence filter cubes and turret: PASSED
Tested all power switches and light adjustments on microscope: PASSED

During testing this Nikon TE2000-S Inverted Fluorescence Phase Contrast Microscope was found to have no issues.
A clear image was produced through the eyepieces as well as through the camera port.
All of the mechanical components moved freely and the test sample was able to be focused without excessive effort.

System consists of:
Base:
Nikon Eclipse TE2000-S Inverted Microscope
Head:
T-TD Binocular Tube Head
(2) CFI 10x/22 Eyepieces
Prisms / Condensers:
LWD 0.52 Condenser
6-position Condenser Turret
Prisms: Ph1
Brightfield Path:
Internal
Fluorescence Light Path:
T-FL
Fluorescence Filter Cubes:
mCherry (Red) EX 560/55nm DM 590nm EM 510/30nm (F0837)
DAPI (Blue) EX 375/28nm DM 415nm EM 460/60nm (F0835)
GFP HQ (Green) EX 470/40nm DM 495nm EM 525/50nm (F0836)
Illumination:
LHS-H100P-1 Halogen 12V 100W Lamp Housing w/ TE2-PS100W power supply
LH-M100CB-1 100W Mercury Lamp w/ C-SHG1 power supply
Stage:
T-SAM Mechanical XY
Custom Stage insert that allows for microplate, standard slide, and petri dish
Objectives:
Manual 6-position Objective Turret
4x/0.13 Plan Fluor PhL DL (O1667)
10x/0.25 Ph1 DL (O1156)
20x/0.75 CFI Plan Apo VC (this is a high quality Nikon APO CFI60 Objective, it was originally installed in a custom piece of equipment where manufacturer did not want to show that they used Nikon objectives) (O0599)
Photo / Port Splits:
100% Eyepiece, 0% Camera
20% Eyepiece, 80% Camera
Camera:
AmScope MU1003 10MP Digital Color Camera USB 3.0
Computer and Software:
Dell Latitude i5 running AmScope software

Communication and power cables.

Configuration and Setup:
Orientation: Inverted
Illumination Type: Brightfield w/ Fluorescence and Phase Contrast
Objectives: 4x/0.13 Plan Fluor PhL DL, 10x/0.25 Ph1 DL, 20x/0.75 CFI Plan Apo VC
Light Sources: 12V 100W Halogen Lamp, 100W Mercury Lamp
Stage: Mechanical XY

This Nikon TE2000-S Inverted Fluorescence Phase Contrast Microscope is currently set up for Brightfield studies with Phase Contrast and Fluorescence.
The MU1003 10MP AmScope CMOS digital color Camera is capable of taking detailed digital images and simple measurements of samples.
The Nikon TE2000-S Inverted Fluorescence Phase Contrast Microscope system includes a Dell Latitude i5 to control the AmScope software for live images.

Video Description:
The video starts in front of the Nikon TE2000-S Inverted Fluorescence Phase Contrast Microscope.
It zooms in on the computer and shows the version of AmScope being used and a live image of the test slide.
The video then shows a close up of the front of the Nikon TE2000-S Inverted Fluorescence Phase Contrast Microscope showing the eyepieces that are used.
The video then shows the condenser unit with a Ph1 condenser inside and the mechanical staging. The video then shows movement on AmScope using the mechanical staging.
The video moves to the left side of the Nikon TE2000-S Inverted Fluorescence Phase Contrast Microscope and the mechanical objective turret is moved and the change in the objective is shown on the computer.
The filter cube turret is opened next and the filters are moved into the light path and shown on the computer.
The video shows the other components in the system including the power supply for both the mercury lamp and halogen lamp.
The video shows the rear of these components along with the rear of the Nikon TE2000-S Inverted Fluorescence Phase Contrast Microscope.

Documentation:
Datasheet: N/A

Brochure: https://drive.google.com/file/d/15soRyPR6Tfh6kVxmhaNps9d4uq6krxNk/view?usp=sharing

Manual: https://drive.google.com/file/d/1jLzxseso5Zd5Ps7-lgRUYWJUojQ4PZC2/view?usp=sharing

This will ship via freight. Please contact us with your zip code to obtain shipping quote.

*SM* Small Crate
OB Packed Weight - 300lb

Please do not hesitate to contact us if you have any questions.

 

 

Here we are showing you our standard packing process  

      1. All items are different, but they all follow the same principle when packaging.

      2. Start with a well-constructed crate

A well-constructed crate would consist of 1/2” to 5/8” Plywood with framing. We generally purchase our crates from a third party who specializes in custom crates.

      3. You always want the Instrument to not be directly on the wood deck of the crate. This is done by placing it on foam, inside of the crate. We use 2” 1.7 lb. density foam which works great. It provides cushioning and enough firmness to support the Instrument.

      4. The next step is to make sure there is nothing on the deck of the Instrument and the Head/ Arm is secured. In some cases there will be multiple arms to secure but for this example there is only one. The reason for this is so there is no free movement during transit which could cause serious damage to the Instrument.

      5. The next step is to make sure your Instrument is covered in either a pallet bag or shrink wrap so no dust or foreign object will get into the crate.

      6. The next step is to secure the instrument inside the crate by bracing. We use a method of 2x4’s which have 1” foam shrink wrapped to them so no piece of wood touches the actual instrument.

      7. Final step is to photograph everything inside the crate and then seal it with screws.

 

All equipment warranty request must have a support case opened within the 60-day Domestic USA and 30-day International warranty period.
To open a support case, please send an email to [email protected] or call (508)974-4896.
Please provide your name, contact information, quotation/invoice number and a brief description of the issue that you are experiencing.
Phone and/or Email support will be provided prior to scheduling a return.
Please see the link below for our detailed warranty statement.
Customers must retain all original shipping materials during the warranty period.

Safe Shipping
From Small Packages to Large Freight
International Shipping
Happy customers all around the world
Warranty
60-day Domestic USA and
30-day International
Registered Vendor To
Many US Colleges, Universities and Fortune 500 Companies