- Stock: In Stock
- Brand: Harvard Apparatus
- Product Code: 24899
Here is a Harvard PHD ULTRA 4400 Single Syringe Pump 703510 Unit4
Please note these pumps are intended to be used with a FlowControl software application shown in the video or directly via RS-485 control depending on your application.
Price for FlowControl application from Harvard is $700.00 and allows control of multiple pumps.
New pump is around $4,600
This Harvard PHD ULTRA 4400 Single Syringe Pump is in good working order.
Please see the exact video and photos below.
Testing we performed:
The Harvard PHD ULTRA 4400 Single Syringe Pump passed all tests and found to be fully functional:
The testing performed was done with a trial version of Flow Control Software for Harvard Apparatus Syringe Pumps. Full version can be purchased from the manufacturer.
Inspected lead screw, pusher block, and slide rails for wear: PASSED
Tested min and max speeds of Pusher Travel Rate at the specification in the manual: PASSED
System consists of:
Harvard PHD ULTRA 4400 Single Syringe Pump 703510
Communication cable and power supply.
Configuration and Setup:
Syringes Size Range: 0.5 micro-liter to 140 milliliter
Pusher Travel Rate: 0.36 um/min to 190.80 mm/min
Step Rate: 27.5 sec/ustep to 52 usec/ustep
Dimensions: 11.75 x 5.5 x 6.5in (29.8 x 14 x 16.75cm)
The video gives an overview of the Harvard PHD ULTRA 4400 Single Syringe Pump, and also shows functionality and communication with software.
Please note: the laptop or Harvard FlowControl SOFTWARE shown in video are not included with the listing - used for testing only. Software can be ordered from Harvard for $700.00 and allows control of up to 99 pumps.
FlowControl Datasheet: https://drive.google.com/file/d/1_usRYElz0iOZScD2bJMjixd_vOGJTYay/view?usp=sharing
FlowControl Manual: https://drive.google.com/file/d/1m9lRAPqCO7GrlJnZWFHRICv-aNh1gCfJ/view?usp=sharing
Please do not hesitate to contact us if you have any questions.
Here we are showing you our standard packing process
1. All items are different, but they all follow the same principle when packaging.
2. Start with a well-constructed crate
A well-constructed crate would consist of 1/2” to 5/8” Plywood with framing. We generally purchase our crates from a third party who specializes in custom crates.
3. You always want the Instrument to not be directly on the wood deck of the crate. This is done by placing it on foam, inside of the crate. We use 2” 1.7 lb. density foam which works great. It provides cushioning and enough firmness to support the Instrument.
4. The next step is to make sure there is nothing on the deck of the Instrument and the Head/ Arm is secured. In some cases there will be multiple arms to secure but for this example there is only one. The reason for this is so there is no free movement during transit which could cause serious damage to the Instrument.
5. The next step is to make sure your Instrument is covered in either a pallet bag or shrink wrap so no dust or foreign object will get into the crate.
6. The next step is to secure the instrument inside the crate by bracing. We use a method of 2x4’s which have 1” foam shrink wrapped to them so no piece of wood touches the actual instrument.
7. Final step is to photograph everything inside the crate and then seal it with screws.
All equipment warranty request must have a support case opened within the 60-day Domestic USA and 30-day International warranty period.
To open a support case, please send an email to [email protected] or call (508)974-4896.
Please provide your name, contact information, quotation/invoice number and a brief description of the issue that you are experiencing.
Phone and/or Email support will be provided prior to scheduling a return.
Please see the link below for our detailed warranty statement.
Customers must retain all original shipping materials during the warranty period.