Your Cart

GE Cytiva Wave 20/50EHT Dual Bag Bioreactor System Rocker Unit 2 Pred Ready To Process (ReadyToProcess) Wave 25 Rocker

GE Cytiva Wave 20/50EHT Dual Bag Bioreactor System Rocker Unit 2 Pred Ready To Process (ReadyToProcess) Wave 25 Rocker
GE Cytiva Wave 20/50EHT Dual Bag Bioreactor System Rocker Unit 2 Pred Ready To Process (ReadyToProcess) Wave 25 Rocker
  • Stock: In Stock
  • Brand: WaVE
  • Product Code: 25304
  • Availability:1

Here is a GE Wave 20/50EHT Bioreactor System for up to two bags Unit 2

P/N 28941345

Predecessor to:
Ready To Process (ReadyToProcess) Wave 25 Rocker

This GE Wave 20/50EHT Bioreactor is in good working order.

Please see the exact video and photos below.

Testing we performed:
The GE Wave 20/50EHT Bioreactor passed all tests and found to be fully functional:
Tested power on, initialization: PASSED
Tested rocking from 2-40 Rocks/min and 2-12deg angle: PASSED
Tested temp up to 40C: PASSED
Tested air pressure up to 0.1 bar: PASSED
Tested filter heater warm-up: PASSED

System consists of:
GE Base 20/50EHT Wave Bioreactor
Heater pad
(2) Filter Heaters
KIT50 EHTD Tray With Dual RTD Probe Temperature Sensors
(2) RTD Probe Temp Sensor Cables
LCD Controller
Power cord

Configuration and Setup:
Working Volume: 0.1-25L x 2
Chamber Type: Two Disposable pre-sterilized bags
Rock Rate/Angle Ranges: Rate-2-40 Rocks/min. Angle-2-12deg
Temperature Range: 0-50C
Max Operating Pressure: 0.1 Bar

Dimensions: 30.5 x 27.6 x 10 in
Weight: 40 lbs
Power Requirements: 120-240 VAC, 50/60 Hz

Video Description:
Video shows around the GE Wave 20/50EHT Bioreactor and all serial and warranty tags.
The rocker is started and heaters turned on. The temp is shown to go up. The air is turned on and reading goes to set point.

Datasheet: N/A



Please do not hesitate to contact us if you have any questions.



Here we are showing you our standard packing process  

      1. All items are different, but they all follow the same principle when packaging.

      2. Start with a well-constructed crate

A well-constructed crate would consist of 1/2” to 5/8” Plywood with framing. We generally purchase our crates from a third party who specializes in custom crates.

      3. You always want the Instrument to not be directly on the wood deck of the crate. This is done by placing it on foam, inside of the crate. We use 2” 1.7 lb. density foam which works great. It provides cushioning and enough firmness to support the Instrument.

      4. The next step is to make sure there is nothing on the deck of the Instrument and the Head/ Arm is secured. In some cases there will be multiple arms to secure but for this example there is only one. The reason for this is so there is no free movement during transit which could cause serious damage to the Instrument.

      5. The next step is to make sure your Instrument is covered in either a pallet bag or shrink wrap so no dust or foreign object will get into the crate.

      6. The next step is to secure the instrument inside the crate by bracing. We use a method of 2x4’s which have 1” foam shrink wrapped to them so no piece of wood touches the actual instrument.

      7. Final step is to photograph everything inside the crate and then seal it with screws.


All equipment warranty request must have a support case opened within the 60-day Domestic USA and 30-day International warranty period.
To open a support case, please send an email to [email protected] or call (508)974-4896.
Please provide your name, contact information, quotation/invoice number and a brief description of the issue that you are experiencing.
Phone and/or Email support will be provided prior to scheduling a return.
Please see the link below for our detailed warranty statement.
Customers must retain all original shipping materials during the warranty period.

Safe Shipping
From Small Packages to Large Freight
International Shipping
Happy customers all around the world
60-day Domestic USA and
30-day International
Registered Vendor To
Many US Colleges, Universities and Fortune 500 Companies