Your Cart

GE AKTA FPLC P-920 Pump P920

GE AKTA FPLC P-920 Pump P920
GE AKTA FPLC P-920 Pump P920

Here is a GE AKTA FPLC P-920 Pump P920

Predecessor to:

This GE AKTA FPLC P-920 Pump has fair cosmetic condition.


Testing we performed:
This P-920 Pump is missing the glass pump cylinders, the control panel works and can navigate the menus without issue.
Mains power
Dial control test
Tested display

System consists of:
GE AKTA Amersham P-920 Pump
Standard power cord

Configuration and Setup:
Pump head: Borosilicate glass pump cylinders (not included)
Operating Pressure Max: 50 bar (5 MPa) (725 psi)
Connections: Tubing connector for 1/8in o.d. tubing (Inlet tubing), Fingertight connector, 1/16in o.d. (Outlet tubing)
Flow Rate: < 20 ml/min

Video Description:
We do a full exterior inspection of the GE AKTA FPLC P-920 Pump paying close attention to serial tags and connections, also the pump heads on the right side are shown in detail to illustrate missing components.
After that the entirety of the P-920 Pump is shown.

Datasheet: N/A

Brochure: N/A

Amersham Manual:

GE Manual:

Please do not hesitate to contact us if you have any questions.

 photo 12116- 1.jpg  photo 12116- 2.jpg  photo 12116- 3.jpg  photo 12116- 4.jpg  photo 12116- 5.jpg  photo 12116- 6.jpg

Here we are showing you our standard packing process  

      1. All items are different, but they all follow the same principle when packaging.

      2. Start with a well-constructed crate

A well-constructed crate would consist of 1/2” to 5/8” Plywood with framing. We generally purchase our crates from a third party who specializes in custom crates.

      3. You always want the Instrument to not be directly on the wood deck of the crate. This is done by placing it on foam, inside of the crate. We use 2” 1.7 lb. density foam which works great. It provides cushioning and enough firmness to support the Instrument.

      4. The next step is to make sure there is nothing on the deck of the Instrument and the Head/ Arm is secured. In some cases there will be multiple arms to secure but for this example there is only one. The reason for this is so there is no free movement during transit which could cause serious damage to the Instrument.

      5. The next step is to make sure your Instrument is covered in either a pallet bag or shrink wrap so no dust or foreign object will get into the crate.

      6. The next step is to secure the instrument inside the crate by bracing. We use a method of 2x4’s which have 1” foam shrink wrapped to them so no piece of wood touches the actual instrument.

      7. Final step is to photograph everything inside the crate and then seal it with screws.


All equipment warranty request must have a support case opened within the 60-day Domestic USA and 30-day International warranty period.
To open a support case, please send an email to [email protected] or call (508)974-4896.
Please provide your name, contact information, quotation/invoice number and a brief description of the issue that you are experiencing.
Phone and/or Email support will be provided prior to scheduling a return.
Please see the link below for our detailed warranty statement.
Customers must retain all original shipping materials during the warranty period.

Safe Shipping
From Small Packages to Large Freight
International Shipping
Happy customers all around the world
60-day Domestic USA and
30-day International
Registered Vendor To
Many US Colleges, Universities and Fortune 500 Companies