Categories

Bio-Rad Luminex Bio-Plex 200 Suspension Array Analyzer w/ BioPlex Manager 6.1

Brand:Luminex
Product Code: 13169
Availability: 1
Price: $11,995.00
Qty:        

Ask a question about this product


Bio-Rad Luminex Bio-Plex 200 Suspension Array Analyzer w/ BioPlex Manager 6.1


Send

Bio-Rad Luminex Bio-Plex 200 Suspension Array Analyzer w/ BioPlex Manager 6.1 | Priced $11,995.00 | bostonind.com (13169)

Here is a Bio-Rad Luminex Bio-Plex 200 Suspension Array Analyzer w/ BioPlex Manager 6.1

Made by Luminex, rebranded by Bio-Rad.

Predecessor to:
Current model.

Condition:
This Bio-Rad Luminex Bio-Plex 200 Suspension Array Analyzer is in good working order.

Please see the exact video and photos below.

Testing we performed:
The Bio-Rad Luminex Bio-Plex 200 Suspension Array Analyzer passed all tests and was found to be fully functional:
Tested operation Software communication
Tested operation of pneumatic pump and set air pressures to specification
Tested operation of Probe and Probe actuator
Tested operation of SD sheath fluid module
Tested operation sheath fluid valves in system
Tested operation of XYP Microplate stage
Performed calibration procedure
Performed all cleaning and flushing protocols (Prime, Wash, Sanitize, Alcohol Flush, Soak)

By performing the Calibration procedure and getting a passing result verifies that all the tested subsystems are operating together as they are designed.
In order to pull the calibration beads from the Test plate requires proper operation of the XYP Stage, Probe, Probe flow control valve, Probe actuator and operation of the syringe pump and it's valving as well.
Then for the calibration beads to be put through the flow cell requires the valving to switch over to the flow cell so the syringe pump can move the sample into the the stream of sheath fluid.
The pressures and the fluidics need to be operating in the proper ranges so that the calibration beads do not flow too fast or too slow through the flow cell.
Then the lasers need to be aligned well enough with the flow cell that the beads can fluores at the right time to be seen by the detectors.
Then the detectors need to be operating properly to receive the fluorescent light and convert it to an electrical signal to be processed by the system and the software on the computer to provide a Passed calibration result.

Based on our tests we are certain this system is operating as it is designed at the time of testing.

System consists of:
Bio-Rad Bio-Plex 200 Analyzer
Bio-Plex XYP Microplate Stage
Bio-Plex HTF Sheath Delivery System
Bio-Plex MCV Plate II
Dell Latitude i5 running Windows 7 Pro with BioPlex Manager software ver6.1 and Software Dongle
Sheath Fluid Bottle w/ Two Attached Hoses
Waste Bottle w/ one Attached Hose
Communication and power cables, and hoses.

Configuration and Setup:
Laser type: Reporter Laser 532 nm and Classification Laser 635 nm
Number of lasers: 2 Lasers
System checks for type of bead and if bead has analytes attached to it.
Sample handling: System uses 96 well-plates
Sample Volume 20-200uL

Standard configuration of Bio-Rad Bio-Plex with HTF sheath delivery system and XYP microplate stage.
This Analyzer comes with the Bio-Plex 200 software and dongle.

Video Description:
This video starts by showing the Bio-Rad Luminex Bio-Plex 200 Suspension Array Analyzer performing calibration functions.
While these are running we do a walk around of the Bio-Rad Luminex Bio-Plex 200 Suspension Array Analyzer and show all manufactures tags.

Documentation:
Luminex 200 Analyzer Datasheet: https://drive.google.com/file/d/0Bz5srQzgsa6uMG5lTWY2MUtMWXM/view?usp=sharing

Luminex xMAP Datasheet: https://drive.google.com/file/d/0Bz5srQzgsa6ubERnRUp4T005S3M/view?usp=sharing

Luminex XYP Datasheet: https://drive.google.com/file/d/0Bz5srQzgsa6uQjJSazI5NGVmMkU/view?usp=sharing

Luminex SD Datasheet: https://drive.google.com/file/d/0Bz5srQzgsa6uazI1VmdNQ0lrRkk/view?usp=sharing

Brochure: N/A

Manual: https://drive.google.com/file/d/0BwHznQS-d5syTHVDMnc4TzBaS1E/view?usp=sharing

This will ship via freight. Please contact us with your zip code to obtain shipping quote.

Please do not hesitate to contact us if you have any questions.

 photo cal screen shot.png

 photo 13169- 2.jpg photo 13169- 1.jpg photo 13169- 26.jpg photo 13169- 4.jpg photo 13169- 5.jpg photo 13169- 6.jpg photo 13169- 7.jpg photo 13169- 8.jpg photo 13169- 9.jpg photo 13169- 10.jpg photo 13169- 11.jpg photo 13169- 12.jpg photo 13169- 14.jpg photo 13169- 15.jpg photo 13169- 16.jpg photo 13169- 17.jpg photo 13169- 18.jpg photo 13169- 20.jpg photo 13169- 21.jpg photo 13169- 23.jpg photo 13169- 24.jpg photo 13169- 25.jpg photo 13169- 28.jpg photo 13169- 29.jpg photo 13169- 30.jpg photo 13169- 31.jpg photo 13169- 32.jpg photo 13169- 33.jpg photo 13169- 34.jpg photo 13169- 35.jpg photo 13169- 27.jpg

 


Bio-Rad Luminex Bio-Plex 200 Suspension Array Analyzer w/ BioPlex Manager 6.1

Manufacturer Description and Specification:

Manufacturer Documentation:

Boston Industries, Inc. © 2018