Categories

Beckman Coulter JS-7.5 362216 Swinging Bucket Centrifuge Rotor

Brand:Beckman Coulter
Product Code: 7698
Availability: 1
Price: $795.00
Qty:        

Ask a question about this product


Beckman Coulter JS-7.5 362216 Swinging Bucket Centrifuge Rotor


Send

Beckman Coulter JS-7.5 362216 Swinging Bucket Centrifuge Rotor | Priced $795.00 | bostonind.com (7698)

Here is a Beckman Coulter JS-7.5 362216 Swinging Bucket Centrifuge Rotor

New rotor is around 13K

Part was kept as a good spare at a local lab until the equipment this was for has been retired

Manual: https://drive.google.com/file/d/0BwHznQS-d5syR1dRNXMwZEFIYUU/view?usp=sharing

Includes only 3 bucket lines, one will need to be purchased from beckman.

You will also need top bolt to hold the rotor into the centrifuge, bolt sold by beckman for around $650. See photo of the bolt below.



7500 RPM - 4 x 250mL (362216) Buckets

Please do not hesitate to contact us if you have any questions.
 photo Beckman Coulter 336380 75 Rotor Specs.jpg photo 07698- 1.jpg photo 07698- 2.jpg photo 07698- 3.jpg photo 07698- 4.jpg photo 07698- 5.jpg photo 07698- 6.jpg photo 07698- 7.jpg photo 07698- 8.jpg photo 07698- 9.jpg photo 07698- 10.jpg photo 07698- 11.jpg photo 07698- 12.jpg


Beckman Coulter JS-7.5 362216 Swinging Bucket Centrifuge Rotor

Manufacturer Description and Specification:

This Beckman Coulter JS-7.5 362216 Swinging Bucket Centrifuge Rotor has been manufactured in a registered ISO 9001 or 13485 facility for use with the specified Beckman Coulter centrifuges.

The Beckman Coulter JS-7.5 362216 Swinging Bucket Centrifuge Rotor, rated for 7500 rpm, is designed to pellet cells and cell debris at moderate g-forces using round, conical, or flat-bottomed tubes or bottles in buckets or multitube carriers. The rotor will also run a variety of tubes in adapters.

The Beckman Coulter JS-7.5 362216 Swinging Bucket Centrifuge Rotor can also be used for density gradient separation, nucleic acid precipitations, and for RIA, where many small-volume samples are centrifuged. The rotor is made of aluminum. The rotor yoke is painted; the buckets and multitube carriers are anodized for corrosion resistance. The tie-down knob secures the rotor to the centrifuge drive hub.

Pins in the rotor drive hole mate with grooves in the centrifuge drive hub (older model centrifuges), or with drive hub teeth (newer model centrifuges), to prevent the rotor from slipping during acceleration and deceleration.


Manufacturer Documentation:

Boston Industries, Inc. © 2017