- Stock: In Stock
- Brand: HyperTask
- Product Code: 16632
Here is an Agilent HyperTask HyperStak Microplate Stacker Pred VStack/BenchCel
We have a total of (8) of these HyperTask HyperStak Microplate Stacker. Each sold separately.
HyperTask brand got into chain of acquisitions, and finally was acquired by Agilent.
HyperStak is logical predecessor to VStack instrument, but now current model from Agilent is BenchCel system.
This HyperTask HyperStak Microplate Stacker is in good working order.
Please see the exact video and photos below.
Testing we performed:
The HyperTask HyperStak Microplate Stacker passed all tests and was found to be fully functional:
Tested power on: PASSED
Tested full vertical travel: PASSED
System consists of:
HyperTask HyperStak Microplate Stacker HyperStak50 (Holds 50 plates)
Standard power cord.
Configuration and Setup:
Standard Plates: 96, 384, 1536
Removable, lightweight racks that accommodate variety of consumables, including most standard SBS-footprint consumables: 96, 384, 1536-well plates, minitubes, deepwells, covered or uncovered plates.
Easy dispensing of pipette tip racks.
Simple, robust design with smooth plate motion.
Precision design minimizes maintenance requirements.
Custom racks can be designed to handle non SBS-standard footprint consumables.
No complicated interface required; can operate as standalone unit.
No requirement for specific machine or robot; usable by many plate handling systems and robot gripper designs.
Top-loading design provides single-point access, allowing easy teaching and efficient robot motions.
Easy to teach height of consumables.
Flexible robot access to plates (portrait/landscape).
Automatically reverts to input mode when empty.
The video starts with a wide view of the HyperTask HyperStak Microplate Stacker. Initialization is shown.
The camera moves 360 degrees around the HyperTask HyperStak Microplate Stacker showing all sides and the serial number.
Please do not hesitate to contact us if you have any questions.
Here we are showing you our standard packing process
1. All items are different, but they all follow the same principle when packaging.
2. Start with a well-constructed crate
A well-constructed crate would consist of 1/2” to 5/8” Plywood with framing. We generally purchase our crates from a third party who specializes in custom crates.
3. You always want the Instrument to not be directly on the wood deck of the crate. This is done by placing it on foam, inside of the crate. We use 2” 1.7 lb. density foam which works great. It provides cushioning and enough firmness to support the Instrument.
4. The next step is to make sure there is nothing on the deck of the Instrument and the Head/ Arm is secured. In some cases there will be multiple arms to secure but for this example there is only one. The reason for this is so there is no free movement during transit which could cause serious damage to the Instrument.
5. The next step is to make sure your Instrument is covered in either a pallet bag or shrink wrap so no dust or foreign object will get into the crate.
6. The next step is to secure the instrument inside the crate by bracing. We use a method of 2x4’s which have 1” foam shrink wrapped to them so no piece of wood touches the actual instrument.
7. Final step is to photograph everything inside the crate and then seal it with screws.
All equipment warranty request must have a support case opened within the 60-day Domestic USA and 30-day International warranty period.
To open a support case, please send an email to [email protected] or call (508)974-4896.
Please provide your name, contact information, quotation/invoice number and a brief description of the issue that you are experiencing.
Phone and/or Email support will be provided prior to scheduling a return.
Please see the link below for our detailed warranty statement.
Customers must retain all original shipping materials during the warranty period.