- Stock: In Stock
- Brand: Teledyne Isco
- Product Code: 51836
- Condition: Pre-Owned
Here is a Teledyne CombiFlash RF200i Flash Chromatography system with ELSD Pred Rf+ Lumen
CombiFlash Rf+ Lumen
This Teledyne CombiFlash RF200i Flash Chromatography system is in good working condition.
Please see the exact video and photos below.
The testing we performed:
The Teledyne CombiFlash RF200i Flash Chromatography system passed all tests and was found to be fully functional:
Touch screen calibration: PASSED
Prime functionality: PASSED
Column detection: PASSED
UV detection of sodium iodide: PASSED
Arm Movement: PASSED
Tube rack RFID detection: PASSED
Column RFID detection: PASSED
Waste/source level sensing: PASSED
Gradient test: PASSED
ELSD detection test: PASSED
The testing conducted on the Teledyne CombiFlash RF200i Flash Chromatography system mentioned above has affirmed that this item is functioning as intended throughout its operation.
This means that you can confidently proceed with purchasing this system knowing it is verified and primed for use.
Sourcing the equipment will not be necessary since this Teledyne CombiFlash RF200i Flash Chromatography system is in stock and has already undergone the testing outlined above, resulting in minimal to no lead time in shipping.
The system consists of:
Teledyne CombiFlash RF200i Flash Chromatography System
Intake Hoses with Caps and Weighted Filters (Qty.:4)
Set of waste hoses
16 x 125mm, 15.5ml rack (other sizes are available for pairing)
Column bypass tube
Standard power cord
*Note, Glassware, test tubes, and column not included*
You can purchase different size racks from Teledyne for around $255.00 each or if we have them in stock they can be swapped out.
Configuration and Setup:
Flow Rate Range: 5 to 200 mL/min
Flow Rate Accuracy: +/- 5%
Pressure Limit: 13.8 bar (200 psi)
Pressure Accuracy: 5% of full scale
Number of Solvents: 4 solvents
Gradient Formation: Binary gradient
Peak Detection Modes: slope or threshold
Flow Cell Pathlength: 0.1 mm, +/-25%
Detector Types: Variable UV and ELSD
UV Detection: variable UV 200-400 nm range
Wavelength Accuracy: +/-5 nm
ELSD Threshold: 0-0.25v
Dimensions (HxWxD): 61 x 36 x 43 cm (24 x 14.1 x 17)
Power requirements: 100-240 VAC, 50/60 Hz, 2A max.
Weight 30.75 kg (67.8 lbs)
The video below gives an overview of the Teledyne CombiFlash RF200i Flash Chromatography system, and also demonstrates its functionality.
Quickstart Guide: Teledyne CombiFlash RF200i Flash Chromatography system
Manual: Teledyne CombiFlash RF200i Flash Chromatography system
This will ship via freight. Please contact us with your zip code to obtain shipping quote.
*SM* Small Crate
Please do not hesitate to contact us if you have any questions.
All equipment warranty request must have a support case opened within the 60-day warranty period.
To open a support case, please send an email to [email protected] or call (508)974-4896.
Please provide your name, contact information, quotation/invoice number and a brief description of the issue that you are experiencing.
Phone and/or Email support will be provided prior to scheduling a return.
Please see the link below for our detailed warranty statement.
Customers must retain all original shipping materials during the warranty period.
Every instrument has unique packing and shipping needs. Few instruments can be safely shipped via Pacel, and most require the safety of a well-built crate.
Here we are showing you our standard packing process
1. All items are different, but they all follow the same principle when packaging.
2. Start with a well-constructed crate
A well-constructed crate would consist of 1/2” to 5/8” Plywood with framing. We generally purchase our crates from a third party who specializes in custom crates.
3. You always want the Instrument to not be directly on the wood deck of the crate. This is done by placing it on foam, inside of the crate. We use 2” 1.7 lb. density foam which works great. It provides cushioning and enough firmness to support the Instrument.
4. The next step is to make sure there is nothing on the deck of the Instrument and the Head/ Arm is secured. In some cases there will be multiple arms to secure but for this example there is only one. The reason for this is so there is no free movement during transit which could cause serious damage to the Instrument.
5. The next step is to make sure your Instrument is covered in either a pallet bag or shrink wrap so no dust or foreign object will get into the crate.
6. The next step is to secure the instrument inside the crate by bracing. We use a method of 2x4’s which have 1” foam shrink wrapped to them so no piece of wood touches the actual instrument.
7. Final step is to photograph everything inside the crate and then seal it with screws.