Tecan Evo 200 Liquid Handler w/ MCA 96, Span-8 Air, ROMA Gripper, POSID3

• Inspected the Tecan Freedom Evo 200 Liquid Handler for physical damage.
• The Liquid Handler components are inspected and cleaned.
• Mechanical components inspected, adjusted, and lubricated if necessary.
• The proper operation of electronic components is confirmed.
• Necessary repairs and services are performed to make sure the Liquid Handler system will function as intended.
• We perform motion/stress tests on all the Tecan Freedom Evo 200’s robotic axis. 
• We test the operation of the pipette heads, and they are verified via Artel MVS.
• We perform alignment calibrations and adjustments on each pipette channel.
• Necessary deck calibrations are performed, and software is taught to recognize installed deck positions.

You will need the consumables starting out: 

• Automated Liquid Handling Consumables | Tecan Consumables (shop.tecan.com) 

We offer both onsite and remote demos via Zoom.

• We invite you to come in for an onsite Demo or schedule a Zoom demo of the Tecan Freedom Evo 200 Liquid Handler. Should you have any concerns, it will give you peace of mind.

Tecan Freedom Evo 200 Liquid Handler comes with a 90-day Warranty.

Warranty Terms:

• The warranty term is 90 Days from the date the Tecan Liquid Handler arrives at the destination.
• This includes parts and labor.
• An extended warranty option may be available.
• Preventative maintenance (PM) and Artel verification can be performed prior to shipping.
• Installation may be available depending on your location
• We can also recommend an experienced 3^rd party to help with complex assay development

Optional Training Package:

We can offer Tecan Liquid Handler training (Remote setup, general software usage, and maintenance procedures guidance). This service is highly recommended to if you are new to this instrument.

Exceptions: 

• Damage to the system due to the use of incorrect fluids, chemicals, or samples.
• Damage due to improper programming that causes physical collision
• Electrical damage from plugging into an incorrect voltage. 
• Shipping damage not reported within 48 hours of delivery
• Issues caused by lack of proper standard maintenance by the end user.
• Moisture/Water damage.
• Physical damage.

Basic steps to confirm quality:

• Confirm that all the Tecan Liquid Handler’s robotic axis are operational and everything is level and calibrated. 
• Confirm there is no present physical damage. (Cracked/broken panels allow air flow that can affect accuracy and are not cheap to replace)
• Confirm that the pipetting channels aspirate and dispense accurately. We recommend asking if the seller can complete Artel MVS verification.
• Make sure there are no loose/damaged components.
• Make sure the door pistons work reliably; bad pistons can drop the hood suddenly, causing injury and/or spilled samples.  
• Ensure the Tecan Liquid Handler’s robotic arm does not skip steps, is not bent, and moves freely on all axes.
• Confirm that the Tecan Liquid Handler is appropriate to your application. Exchanging or upgrading your system after the fact will be costly.
• Make sure there are no missing components, including carriers you may require.
• If you encounter any of the issues above, expect an expensive repair bill. Thus, we recommend confirming everything before you order.

If you have concerns, we highly recommend inspecting the Tecan Liquid Handler in person or doing a live Zoom call; this will allow you to evaluate the Robotic Pipetting system and confirm that everything works.

• We stock multiple Tecan Freedom Evo 200 Liquid Handler systems along with many replacement parts.

• If you are a US or Canadian customer, we are likely already a registered vendor in your University's vendor system. This would greatly expedite the process of PO approvals and get the Tecan Liquid Handler into your lab faster.
• NET terms are accepted from US & Canadian universities and Fortune 500 companies.

• We can ship within a few days to 2 weeks. Ship times depend on the current demand for our instruments and the customization required. Members of our sales team will be able to offer current estimates.

• All Tecan Liquid Handler systems are shipped fully insured within the US and internationally as long as we are a shipper and handle shipping arrangements.
• If the buyer handles shipping, then shipping insurance responsibility falls to the buyer; we highly advise that the buyer obtain shipping insurance from their carrier.

See the “How we pack” tab for photos of how we pack liquid handlers.

Packing

• Most Tecan Liquid Handlers ship in fully enclosed ISPM-15 certified wooden crates, with proper padding underneath and the sides, and have moving components braced.
• Accessories are packed safely in boxes with padding and then safely packed inside the crate.
• We may not use a crate for local deliveries to save you money *if delivered by us.
• We often use “tilt’ & “shock” indicators on the crates to ensure the crate has not been excessively tilted and dropped where equipment may suffer damage.
• Photos are taken during the packing process to make sure nothing is missed.

USA/Canada Shipping

• Within the US and Canada, we will ship via selected freight carriers. We do not use low-price/high-damage carriers as we want the equipment to get safely to you.

International Shipping

• Internationally, we will only ship via Air Freight or Air Parcel (such as UPS or DHL), which provides reliability, no exposure to Ocean weather, and timely delivery.
  We have extensive experience shipping robotic liquid handlers around the world.

Our experience and process

• We have safely packed and shipped hundreds of sensitive analytical instruments, including Tecan Freedom Evo 200 Liquid Handlers.
• Before final packing/shipping, the Tecan Freedom Evo 200 Liquid Handler is re-checked to verify performance.

*LA* Large Crate
600#

• Well, this one is easy; buying a pre-owned Tecan Freedom Evo 200 Liquid Handler is great for the planet; you are reducing unnecessary waste, CO2 output, and water use that would be used during the manufacturing process.   

Absolutely! Please give us a call (1-617-366-2699) or complete this form to get your questions answered or receive a formal Quote.