Tecan Freedom EVO 200 Liquid Handler Span-8, MCA 96, ROMA gripper, and POSID

• Conducted a thorough examination of the Tecan Freedom EVO 200 Liquid Handler to check for any physical damage.
  
• Clean and inspect all components of the liquid handler to ensure they are in good shape.
• Review and, if needed, adjust and lubricate any mechanical components.
• Verify and ensure the proper functioning of all electronic components.
• Carrie out any required repairs and maintenance to ensure the Liquid Handler operates correctly.
• Perform motion and stress tests of all Tecan Freedom EVO 200 robotic axes.
• Test and validate the performance of pipetting volumes using the Artel MVS system.
• Adjust and calibrate the alignment of each pipette channel.
• Conducted deck calibrations and programmed the software to recognize the positions of installed decks.

You will need the consumables starting out: 

• Automated Liquid Handling Consumables | Tecan Consumables (tecan.com) 

We offer both onsite and remote demos via Zoom.

• We invite you to come in for an onsite Demo or schedule a Zoom demo of the Tecan Freedom EVO 200 Liquid Handler. Should you have any concerns, it will give you peace of mind.

Tecan Freedom EVO 200 Liquid Handler comes with a 120-day US Warranty & 60-day international.

Warranty Terms:

• The warranty term is 120 Days from the date the Tecan Liquid Handler arrives at the destination US.
• For EU and Canadian customers, we offer 60 days warranty parts and labor warranty
• An extended warranty option may be available.
• Preventative maintenance (PM) and Artel verification may be performed prior to shipping.
• Installation may be available depending on your location
• We can also recommend an experienced 3^rd party to help with complex assay development

Optional Training Package:

We can offer Tecan Liquid Handler training (Remote setup, general software usage, and maintenance procedures guidance). This service is highly recommended to if you are new to this instrument.

Basic steps to confirm quality:

• Ensure all robotic axes of the Tecan Liquid Handler are operational, properly leveled, and calibrated.
• Verify the absence of physical damage to avoid airflow issues and expensive replacements.
• Check the precision of pipetting channels for accurate aspiration and dispensation; consider requesting Artel MVS verification from the seller.
• Inspect for any loose or damaged parts.
• Confirm the door pistons operate smoothly to prevent sudden hood closure and potential injuries or sample spills.
• Ensure the robotic arm doesn’t miss steps, remains unbent, and moves freely across all axes.
• Ascertain the Tecan Liquid Handler suits your application needs to avoid costly post-purchase modifications or upgrades.
• Check for any missing parts, including necessary carriers.
• Be aware that encountering any of the above issues could lead to significant repair costs, so thorough pre-purchase verification is advised.

If you have concerns, we highly recommend inspecting the Tecan Liquid Handler in person or doing a live Zoom call; this will allow you to evaluate the Robotic Pipetting system and confirm that everything works.

• If you are a US or Canadian customer, we are likely already a registered vendor in your University's vendor system. This would greatly expedite the process of PO approvals and get the Tecan Liquid Handler into your lab faster.
• NET terms are accepted from US & Canadian universities and Fortune 500 companies.

• We can ship within a few days to 2 weeks. Ship times depend on the current demand for our instruments and the customization required. Members of our sales team will be able to offer current estimates.

• All Tecan Liquid Handler systems are shipped fully insured within the US and internationally as long as we are a shipper and handle shipping arrangements.
• If the buyer handles shipping, then shipping insurance responsibility falls to the buyer; we highly advise that the buyer obtain shipping insurance from their carrier.

Packing

• Most Tecan Liquid Handlers ship in fully enclosed ISPM-15 certified wooden crates, with proper padding underneath and the sides, and have moving components braced.
• Accessories are packed safely in boxes with padding and then safely packed inside the crate.
• We may not use a crate for local deliveries to save you money *if delivered by us.
• We often use “tilt’ & “shock” indicators on the crates to ensure the crate has not been excessively tilted and dropped where equipment may suffer damage.
• Photos are taken during the packing process to make sure nothing is missed.

USA/Canada Shipping

• Within the US and Canada, we will ship via selected freight carriers. We do not use low-price/high-damage carriers as we want the equipment to get safely to you.

International Shipping

• Internationally, we will only ship via Air Freight or Air Parcel (such as UPS or DHL), which provides reliability, no exposure to Ocean weather, and timely delivery.
  We have extensive experience shipping robotic liquid handlers around the world.

Our experience and process

• We have safely packed and shipped hundreds of sensitive analytical instruments, including Tecan Freedom EVO 200 Liquid Handlers.
• Before final packing/shipping, the Tecan Freedom EVO 200 Liquid Handler is re-checked to verify performance.

*XL* Xtra Long
800#

• Well, this one is easy; buying a pre-owned Liquid Handler is great for the planet; you are reducing unnecessary waste, CO2 output, and water use that would be used during the manufacturing process.   

Absolutely! Please give us a call (1-617-366-2699) or complete this form to get your questions answered or receive a formal Quote.